Feature:Rotating front guide hole: allows you to connect accessories like a handle. It is firmly connected to most wires and mesh wire handles.Function: allows you to easily pull the cable yourself through walls, floors and ceilings, and even gaps in the ceiling. There is no longer a need to laboriously arrange wiring between the wall and the enclosed space.Labor saving design: Designed to make the work of electricians easier when wiring through the floor voids.:Name: Wire Pulling SystemProduct Category: Electromagnetic cable systemMaterial: NylonCable length: 20ft. / 6mApplicable wall thickness: 25mmPackage contents: nylon rope, scout & bait magnet, eyelet tapFeatures:1.The strength of the magnet ensures that the wire puller can easily lay the wires under the floor, under the steel structure wall, under the carpet, etc.2.Two types of magnets can pass through holes of different sizes.3.An ideal tool to speed up all work by laying cables,will not damage the walls in the finished properties, allowing you to complete the work as neatly as possible.4.Eliminate the damage to the walls during work and the large amount of travel in and out of the attic.5.Non-marching leader sailed around obstacles up to 20 feet.How to use:The innovative leading pull design of the puller can smoothly pass the cable in the enclosed space in insulated spaces and other obstacles, and then allows you to pull the cable from the floor to the access point.Step 1. Untie the wire from the spool and pass the bait magnet (attached to the wire) through the required place;Step 2. Fix the cable (longest 10mm) to the eyelet attachment;Step 3. Connect it to the reconnaissance magnet she was. Use the thumb grip to pass the wire through the wall;Step 4. Pass the cable through the gap easily.Pullers can help you work smarter, get the job done quickly and get it rightPacking list:1*PullerNote1.Please allow 0-1cm error due to manual measurement. Please make sure you do not mind before you bid.2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.3.When completing the wiring in the properties, you cannot intrude too much into the wall.4.The cable needs to be passed through the back of the cavity wall or the wall of the open space, but cannot cut into the structure of the building.5.Due to the strength of the magnet, it must be separated from electrical test equipment or any equipment that is affected by magnetism.6.Due to the strength of the magnet, we do not recommend using it for glass walls.