Empty Egg Tool Kit with Pump and Drill for Easter Crafting

Nice tool for making empty eggshells: This tool makes it easy to create hollow eggs, ideal for Easter decorations or egg painting. Easy to Use: The Easy Egg Blower provides a simple, quick, and clean method to blow out eggs using only one hole. Its hand pump design eliminates the need for mouth contact and allows for easy rinsing of both the egg and the tool. A small vent hole on the top of the rubber pump ensures rapid pressure recovery after each squeeze. Blowing out eggs is straightforward and satisfying with this handy tool. Instructions: 1. Drill one small hole in the eggshell using the included drilling tool. 2. Assemble the needle with the rubber pump, insert the needle into the egg hole, and gently pump until the egg contents are fully expelled. 3. Draw water into the pump to rinse the tool. You may also gently pump rinse water into the eggshell to clean it internally. Safety & Usage Notes: - This tool should be used with care and kept away from children. Adult supervision is required when children are involved. - The hole in the egg must be slightly larger than the needle diameter to allow egg contents to flow out freely. - Avoid pumping too quickly—apply slow, gentle pressure to prevent cracking the eggshell. - If initial airflow is difficult, remove the needle, gently shake the egg to loosen contents, then reinsert the needle and continue. - If the needle connector becomes loose during assembly or disassembly, tighten it securely by hand. Color: Black Material: Rubber + Metal Package Contents: 1 x Rubber Pump 1 x Bent Needle (1.0mm × 100mm) 1 x Straight Needle (1.0mm × 100mm) 1 x Straight Needle (1.6mm × 100mm) 1 x Drilling Tool Note: Color may vary slightly due to lighting conditions and screen settings. Slight measurement variations of ±1–3 cm may occur.