2 Inch Toothpick FPV Drone ELRS 2.4G Lightweight Micro Freestyle Quadcopter for Indoor Outdoor

2inch Toothpick FPV Drone Elrs 2.4G Overview A compact, lightweight 2inch toothpick FPV drone designed for indoor and outdoor light flight. The platform combines a small 91.8 mm wheelbase and a low 44.3 g dry weight with a performance 4in1 flight controller and ESC solution to deliver stable, responsive handling and efficient lift for freestyle and cruising flights. Key benefits Ready for tight spaces and casual outdoor use: Small footprint and light weight make it easy to fly indoors, through rooms, hallways, and around obstacles while still offering stable outdoor performance in light wind. Smooth, responsive control: Dshot150/300/600 compatible ESCs and an STM32F411based flight controller provide predictable throttle response and reliable stabilization for precise maneuvers. Adjustable power and range: Onboard VTX adjustable between 0, 25, 100, and 400 mW and an integrated SPI receiver option for 2.4G link provide flexible signal and video settings to match different flying environments. Efficient, punchy motors: 1003 class motors rated at 10000 KV for 2S operation deliver the thrust needed for agile freestyle moves and quick responsiveness while keeping the overall weight low. Compact, integrated electronics: AIO flight controller and ESC, onboard receiver, and camera integration minimize wiring and streamline setup and maintenance. Specifications Frame type: Draknight frame Frame size: Type 52 inch Frame Wheelbase: 91.8 mm Overall footprint: 104 x 104 mm Propeller support: Up to 2 inches Weight: 44.3 g (without receiver) Flight controller: SPECTER12 ES24S AIO FC Main MCU: STM32F411 FC firmware: BF HGLRHGLRCF411SX1280_15A Input voltage: 2S to 4S LiPo BEC output: 5V / 1.5A ESC Continuous current: 12A Burst current: 15A (5 s) ESC firmware: ZH30 (Blheli_S) Supported protocol: Dshot150 / 300 / 600 Motor: Specter 1003, 10000 KV (2S) Camera: Ant camera module Onboard receiver: SPI ExpressLRS 2.4G (ELRS 2.4G) Onboard VTX: adjustable 0 / 25 / 100 / 400 mW Recommended propellers: Gemfan2023 Recommended batteries: 2S 550 mAh to 720 mAh What is included 1 x Draknight drone (assembled) 2 x printed spare parts 1 x onboard ELRS receiver or alternative TBS receiver option (selectable) Onboard flight controller, ESC, camera, VTX, and motors installed Why this drone solves common problems Space constraints: The small 104 x 104 mm footprint and 2inch propeller support let you fly where larger drones cannot, enabling indoor practice and tightline maneuvers. Complex setup: Integrated AIO flight controller and ESC with preinstalled firmware simplify setup and reduce wiring, lowering the time from unboxing to flying. Limited power options: Adjustable VTX power and a 2S to 4S input range let you optimize run time and signal performance for different locations and flying styles. Unstable control feeling: rate ESC protocols and an STM32F411based controller deliver consistent stabilization and smooth throttle response for more accurate control. Use scenarios Indoor freestyle practice: Fly through rooms, stairwells, and narrow corridors to practice tight turns and quick flicks without needing a large outdoor area. Light outdoor cruising and footage: Use the adjustable VTX and 2S battery options for short outdoor flights in light wind to capture smooth lowaltitude footage and freestyle moves. Park and plaza sessions: Bring the compact drone to public open spaces for short sessions where a small, quiet platform is preferred over larger, faster race setups. Compatibility and setup notes Propellers: Use recommended Gemfan2023 2inch props for performance and balance. Battery: results with 2S 550 to 720 mAh LiPo packs; check motor KV and flight controller voltage range if using 3S or 4S. Receiver options: Onboard SPI ExpressLRS 2.4G receiver is included; a different receiver option may be fitted depending on selection. Firmware: Flight controller and ESC come with BF and Blheli_S compatible firmware respectively, supporting standard configuration tools for tuning. Practical considerations Keep weight low by selecting minimal receiver and battery options to maximize agility and flight time. Use the adjustable VTX power to comply with local video transmission preferences and to manage range versus battery drain. printed spare parts provided for minor repairs after crashes to restore frame rigidity. This compact toothpick drone combines a lightweight Draknight frame, integrated SPECTER12 ES24S AIO flight controller and ESC, a 1003 motor set, and adjustable video and radio options to deliver an easytosetup platform for indoor flying, light outdoor sessions, and closequarters freestyle practice.