Adjustable Speed PWM DC Motor Controller 12V 24V 48V Forward Reverse Remote

Function Introduction Function 1 - Soft start time setting: 000-100 (0-10 seconds) adjustable, default 1 second Function 2 - Soft stop time setting: 000-100 (0-10 seconds) adjustable, default 1 second Function 3 - Maximum Speed Scale Setting: 000-9990 (0-9990), default 100 Function 4 - Speed lower limit setting: 000-9980 (0-9980) adjustable, default 0 Function 5 - Speed upper limit setting: 000-9980 (0-9980) adjustable, default 100 Note for Function 3, Function 4, Function 5: If the value exceeds 999 on the setting interface, the thousands digit will flash and the full value will not be displayed Function 6 - Speed increase/decrease value setting: 001, 002, 005, 010, 015, 020, 025, 050, 100. Each press of the increase/decrease button adjusts speed by the selected value Function 7 - Power on start mode: Mode 1: Motor does not start when powered on; Mode 2: Motor starts when powered on, default Mode 1 Function 8 - Total running time setting: 0~99:59:59 adjustable. When set to 0, no timing function is activated, default 0 Function 9 - Forward rotation time setting: 0~99:59:59 adjustable, default 10 seconds Function 0 - Stop time setting: 0~99:59:59 adjustable, default 10 seconds Function A - Reverse time setting: 0~99:59:59 adjustable, default 10 seconds Hour, minute, second switching: Long press the setting button for 2 seconds to switch between hour, minute and second adjustment for time-related settings Function E - Manual and automatic mode selection: Mode 1 is manual mode, in which Function 8, Function 9, Function 0 and Function A are disabled; Mode 2 is automatic mode, in which Function 8, Function 9, Function 0 and Function A are enabled Parameter Input voltage: DC 6-55V Maximum current: 20A Display method: LCD color screen Forward and reverse: bidirectional Speed regulation method: button and knob Wireless remote control: Yes Supported load: compatible with DC brushless motor Installation method: embedded Wiring type: fence type terminal Net weight of product: 95g+25g Product size: width 77mm x height 57mm x thickness 38mm Opening size: width 72mm x height 52mm Material: Plastic Wiring Instructions Input voltage must be within 6-55V DC, and the specific input voltage must be equal to the rated voltage of the connected motor 1. Input power positive terminal 2. Power negative terminal 3. Motor positive terminal 4. Motor negative terminal Remote Control Code Matching Long press the setting button, then power on the device, then press any key on the remote control once. The backlight flashes twice to indicate successful code matching Factory Reset Enter the settings interface, press and hold the setting button for 6 seconds. The backlight flashes twice to indicate successful restoration to factory settings Note Appearance may vary slightly between different product batches, which does not affect normal use Package Contents 1 x Speed Controller 1 x Remote control