(1) Operating voltage: 1.8V~3.6V, 3.3V recommended(2) Work in 433MHz band license-free use(3) High operating rate 500kbps, support 2-, GFSK and MSK modulation(4) Software modifiable rate parameters to better meet customer requirements under different conditions of useHigh rate: faster data transmission rate. Low rate: stronger anti-interference and penetration , transmission distanceHigh sensitivity (-110dBm at 1.2Kbps, 1% packet BER)Built-in hardware error detection and point-to-multipoint communication address controlLow current consumption (15.6mA in , 2.4Kbps, 433MHz)Programmable control of output power up to +10dBm for all supported frequenciesWireless function, support low-power electromagnetic wave activation, wirelessly wake up the low-power sleep state of the devicesupport for automatic channel clearance access () transmission, that is, the carrier systemfast frequency change synthesizer to bring the appropriate frequency hopping systemModule can be software set address, software programming is convenientStandard DIP pitch interface for embedded applicationsSeparate 64- and TX data Actual transmission distance of 200 or more in open area (depending on environment and communication rate, etc.): PCBColor as shownPackage Contents:1 x moduleOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.