2pcs WoodWorking Band Saw Rubber Band 8 Inch/9 Inch/10 Inch/12 Inch/14 Inch Scroll Wheel Rubber Ring WoodWorking Band Saw

2pcs WoodWorking Band Saw Rubber Band 8 Inch/9 Inch/10 Inch/12 Inch/14 Inch Scroll Wheel Rubber Ring WoodWorking Band Saw Features: *for 8 Inch: Use for Band Saw Wheel diameter 205 mm, advice bandsaw blade length is 1425 mm. * for 9 Inch: Use for Band Saw Wheel diameter 230 mm, advice band saw blade length is 1570 mm. * for 10 Inch: Use for Band Saw Wheel diameter 250 mm, advice band saw blade length is 1826 mm. * for 12 Inch: Use for Band Saw Wheel diameter /317 mm, advice band saw blade length is 2240 mm. * for 14 Inch: Use for Band Saw Wheel diameter 350 mm, advice band saw blade length is 2560 mm. *In order to ensure that the anti-skid rubber ring can be tightly combined with the outer edge of the wheel, and avoid slippage and insufficient cutting force due to loose rubber ring, the circumference of all anti-skid rubber rings must be smaller than the circumference of the band saw wheel. *The rubber ring has good wear resistance and toughness, ensuring that it is not easy to break and loosen after installation. Installation method: 1. Remove the damaged rubber ring. If there is rubber ring on the outer edge of the wheel, please clean up the first. 2. Soak the new anti-skid rubber ring in warm water for 3-5 minutes, and install it after the rubber ring is softened. 3. When installing, start from side of the wheel, press end of the rubber ring firmly into the groove on the outer edge of the wheel, and then use a flat-blade screwdriver to slowly pry the rubber ring into the groove on the outer edge of the wheel. Do not use too much force. It is so violent that the rubber ring is damaged. 4. If necessary, you can place a few drops of glue along the grooves on the edge of the wheel to ensure a more secure installation. Specifications: Product Name: Band Saw Rubber Band Material: Rubber Color: Black Optional Size: for 8 Inch, for 9 Inch, for 10 Inch, for 12 Inch, for 14 Inch for 8 Inch: 8" x 1/2" x 0.12" (205 * 12.7 * 3mm)(Approx. ) for 9 Inch: 9" x 1/2" x 0.12" (230 * 12.7 * 3mm)(Approx. ) for 10 Inch: 10" x 1/2" x 0.12" (250 * 12.7 * 3mm)(Approx. ) for 12 Inch: 12" x 3/4" x 0.12" (317 * 20 * 3mm)(Approx. ) for 14 Inch: 14" x 1" x 0.12" (350 * 24.5 * 3mm)(Approx. ) Suitable for: WoodWorking Band Saw Quantity: 2Pcs Package Included: 2 Band Saw Rubber Band Note: 1.Transition: 1cm=10mm=0.39inch. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 3. Please allow slight manual measurement deviation for the data. 4.Please after receiving the goods, put them in hot water and heat them to spread evenly. _x000D_ _x000D_