Description 2 Woodworking Rubber Bands, 8"/9"/10"/12"/14" with Rollers, Rubber Rings, for Woodworking Bandsaws 2 Woodworking Rubber Bands, 8"/9"/10"/12"/14" with Rollers, Rubber Rings, for Woodworking Bandsaws Features: *8": Suitable for bandsaws, roller diameter 205mm, recommended bandsaw blade length 1425mm. * 9": Suitable for bandsaws, roller diameter 230mm, recommended bandsaw blade length 1570mm. * 10": Suitable for bandsaws, roller diameter 250mm, recommended bandsaw blade length 1826mm. * 12": Suitable for bandsaws, roller diameter 317mm, recommended bandsaw blade length 2240mm. * 14-inch: Suitable for band saws with a 350mm roller diameter. Recommended band saw blade length is 2560mm.* To ensure the anti-slip ring is tightly installed on the outer edge of the disc, preventing slippage and insufficient cutting force due to a loose rubber ring, the circumference of all anti-slip rings must be smaller than the circumference of the band saw wheel.* The rubber ring has good wear resistance and toughness, ensuring it is not easily damaged or detached after installation.* Installation Method:1. Remove the damaged rubber ring. If there is a rubber ring on the outer edge of the disc, clean it first.2. Soak the new anti-slip ring in warm water for 3-5 minutes until it softens before installation.3. During installation, start from the side of the wheel, firmly pressing the rubber ring into the groove on the outer edge of the wheel. Then, use a flathead screwdriver to slowly pry the rubber ring until it is fully embedded in the groove. Do not use excessive force to avoid damaging the rubber ring. 4. If necessary, you can apply a few drops of glue to the grooves on the edge of the wheel to ensure a more secure installation. Specifications: Product Name: Band Saw Rubber Band Material: Rubber Color: Black Available Sizes: Suitable for 8 inches, 9 inches, 10 inches, 12 inches, and 14 inches Suitable for 8 inches: 8 inches x 1/2 inches x 0.12 inches (approx. 205 * 12.7 * 3 mm) Suitable for 9 inches: 9 inches x 1/2 inches x 0.12 inches (approx. 230 * 12.7 * 3 mm) Suitable for 10 inches: 10 inches x 1/2 inches x 0.12 inches (approx. 250 * 12.7 * 3 mm) Suitable for 12 inches: 12" x 3/4" x 0.12" (317 * 20 * 3mm) (approx.) Suitable for 14 inches: 14" x 1" x 0.12" (350 * 24.5 * 3mm) (approx.) Application: Woodworking band saw Quantity: 2 pieces Package includes: 2 rubber bands for band saws Note: 1. Conversion: 1 cm = 10 mm = 0.39 inches. 2. Due to factors such as monitor brightness, the actual color of the product may be slightly different from the picture displayed on the website. 3. Please allow slight manual measurement errors. 4. After receiving the goods, please soak them in warm water. Heat them to spread them evenly.