Wardrobe and Cabinet Door Load Switch This load switch is designed for direct control of lighting in specific applications, providing a reliable and simple way to automate lights when wardrobe or cabinet doors are opened or closed. It is not suitable for use as a sensor or signal switch, and cannot be tested with a multimeter. Key Features and Benefits: Automatic lighting control: Light turns on when the door opens, and turns off when the door closes. Designed for use with wardrobe cabinets, hotel entrance doors, display cases, and similar setups. Compact concealed installation for a clean and unobtrusive look. housing and wire colors (default black and white, other colors available on request). Compatible with both ACpowered lamps and DCpowered LED lights, with specified load capacities. Technical Specifications: 1. Installation: Concealed mount. Drill a 10 mm diameter hole in the door and insert the switch directly. Ensure the magnet axis and switch axis are aligned. 2. Housing and Wire Colors: Standard colors are black and white; other colors available upon customer request. 3. AC lamp load capacity (direct connection to 85240V power supply): Incandescent (tungsten filament) lamp: maximum 50W. Energysaving lamp (T4, T5, power factor λ < 0.80): maximum 38W. Radiation lamp (power factor λ < 0.80): maximum 30W. For lamps where power factor λ > 0.80, connect a filter inductor (optional accessory) to the wiring loop. 4. DCpowered LED load capacity: 12VDC: maximum 30W. 24VDC: maximum 50W. Use Scenarios: Wardrobe: Lights automatically switch on when the wardrobe door is opened, providing instant visibility without manual operation. Hotel Entrance Cabinets: Improves convenience and presentation by automatically lighting display cabinets or storage areas when accessed. Retail or Display Cases: Ensures products are illuminated when doors are opened, enhancing visibility for customers. Performance Notes: This is a load switch intended strictly for lighting control. Do not connect to alarms, household appliances, or other nonlighting electrical systems. Not designed for measurement via multimeter or use as a signal/semaphore switch. This switch offers a discreet, efficient, and reliable method of activating lights only when needed, reducing energy waste and improving ease of use. By selecting the appropriate load type and following installation guidelines, you will achieve performance and longevity from your lighting setup.