Feature: 1. Reliable Control: Adopting PWM control, the VFD enables high torsion, high accuracy and wide speed range driving with good electromagnetic compatibility and low noise. 2. Better Stability: Comes with good anti tripping performance and the ability to adapt to rough power, temperature, humidity, and dust, thus ensuring great stability. 3. Simple Operation: Equipped with digital display and keyboard, the motor Variable Frequency Drive is very convenient in operation, and very high in working efficiency. 4. Wide Application: The motor VFD can be widely applied to electric motor, mixer, ball mill, water pump, crane, conveyor, air compressor, fan, CNC machine tool and so on. 5. Quick in Cooling: The quick cooling radiator allows for intelligent start and stop, and the aluminum alloy radiator will largely promote the heat dissipation speed. Specification: Item Type: Variable Frequency Drive Material: ABS, aluminum alloy. Input Voltage: 220-240V Output Power: 2.2KW Output Current: 9.5A Output Frequency: 0-999Hz Applicable Machines: For motor, mixer, ball mill, water pump, crane, conveyor, air compressor, fan, CNC machine tool, etc. . Package List: 1 x Variable Frequency Drive Note: 1. Before wiring, please confirm whether the input power supply is in a power off state. 2. The wiring operation should be carried out by professional electrical and engineering personnel. 3. The grounding terminal must be grounded. 4. After completing the emergency stop circuit wiring, be sure to check whether the action is effective. 5. The output line of the VFD must not be connected to the housing, and the output line must not be short circuited.6. Please confirm whether the voltage of the AC main circuit power supply is consistent with the rated voltage of the VFD.7. Do not perform a voltage withstand test on the VFD. 8. Please connect the braking resistor according to the wiring diagram.9. Do not connect the power cord to the output U, V, and W terminals.10. Do not connect the contactor to the output circuit. 11. Be sure to install a protective cover before powering on. When removing the cover, be sure to disconnect the power supply. 12. Select the VFD with reset and retry function, and keep away from mechanical equipment since the alarm will suddenly restart when it stops. 13. After confirming that the operation signal is cut off, the alarm can be reset. When the alarm is reset under the operating signal state, the VFD may suddenly start up.14. Do not touch the terminals of the VFD. There is high voltage on the terminals, which is very dangerous. 15. During power on, do not change wiring or disassemble terminals.16. Cut off the power supply of the main circuit before carrying out inspection and maintenance. 17. Do not modify the VFD.