TN90A Pointer VU Meter: High-Precision Digital Power Meter Head with Level Indicator for Audio Spect

29,95 €
Envio GRATUITO

TN90A Pointer VU Meter: High-Precision Digital Power Meter Head with Level Indicator for Audio Spect

  • Marca: Unbranded

TN90A Pointer VU Meter: High-Precision Digital Power Meter Head with Level Indicator for Audio Spect

  • Marca: Unbranded
PVP: 59,00 €
Preço: 29,95 €
Poupa: 29,05 € (49%)
Vendido por:
29,95 €
Envio GRATUITO

Em stock

Aceitamos as seguintes formas de pagamento

Descrição

Standard test conditions: temperature 20 ℃, humidity 70%, if there is no difference in the test results, you can also test under normal temperature and humidity. Current sensitivity: the scale range of the pointer is from zero to the maximum scale (full scale position), and the sensitivity is 960ua ± 8%. Internal impedance: 650ohm±10%. Insulation resistance: 500V DC of case and circuit plus 50m ohm or higher. Zero position: use the default position of the inst ent. The point where the front end of the pointer coincides with the center of the zero scale is the reference pointer and zero overlap scale. The tolerance is ± 1 mm. Balance: when the default position is tilted forward and backward by 90 degrees, the allowable error range of the inst ent is ± 1 mm. Pointer sticking: when the full scale current instantly triples the over-current and slowly reduces the current reading sensitivity from 1/2, the pointer return to 1/3 of the scale. Friction: when the current is applied to the inst ent and slowly increases or decreases to a certain value, the error range of the indication point is ± 1 mm. Pointer swing direction:from left to right Needle length:44 ± 1 mm from the center line to of the needle Pointer width:0.45 ± 0.05 mm Use direction of meter:vertical Operating temperature range:- 10 ℃ to + 60 ℃ RH 35 to 85% Storage temperature limit:- 20 ℃ to + 60 ℃ RH 35 to 85% Do not place the inst ent in direct sunlight, and store the inst ent in the package to avoid entering the inst ent. The welding conditions place the terminals in a tinplate of about 3 mm at 230 ° C for 3.5 seconds and remain normal after this test. Soldering temperature:keep the soldering iron temperature at 350 ℃, contact with the terminal for 3.5 seconds, and contact the front end of the terminal with the soldering iron about 3 mm. The test remained normal. Anti static:test the dry nylon cloth on the of the
  • Identificação da Fruugo: 406958200-862684771
  • EAN: 7050244176651

Entrega e Devoluções

Enviado dentro de 2 dias

  • STANDARD: GRÁTIS - Entrega entre segunda 06 outubro 2025–segunda 13 outubro 2025 - GRÁTIS

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Velvet Hive
  • Dongguan Zuiyu Electronic Technology Co., Ltd.
  • Room 401, No. 19, Dongxiang, Yanggonglang, Qiaotou Town, Dongguan City, Guangdong Province
  • Dongguan
  • CN
  • 523520
  • simona14@163.com
  • 17512067209

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901