LCD Screen with Digitizer Full Assembly Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with glass splinters. Tips 2: Simulate testing Screen replacement is a very fragile product. We strongly suggest testing before installation. Please simulate testing by disassembling the mobile phone, connecting the motherboard, LCD or screen, o cable, and new replacement, then powering on to complete the test. If the test is successful, proceed with installation. If there is no display, immediately. Do not force installation. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure the LCD cable is not over-bent. Bending beyond 90 degrees may cause black display. About the product 1. LCD display and touch screen digitizer assembly replacement part 2. Replace your broken or non-functional component with a new one 3. Restore your device to a like-new appearance 4. Designed for precise fit and full functionality 5. Each item is tested and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible after the screen is installed