Origin : CN(Origin) Item Weight : 1KG Special Features : Mobile APP control Model Name : A6 Please kindly Note: If the original car was equipped with a steering wheel lock and  chip anti-theft , before to modify one-button start ,the car must be released from the original car steering wheel lock and chip anti-theft and then can be used normallyNote:Since the logistics rejects all items with batteries, we can only remove the battery from the remote control. After receiving the packaging, please purchase the remote control battery yourself, we apologize for this! The battery specification is CR2032 button battery. 1. One-key start/stop2. Remote control start/stop3. Smart handbrake detection4. Intelligent oil pump startup detection5. Remote trunk open6. Remote car search (horn buzzing, blinking indicator lights)7. Open door flashing warning function when parking on the roadside8. After locking the door, prying the door triggers the alarm prompt function9. Remotely unlock/close the lock10. PKE keyless comfortable entry function, automatically unlocks the door 1.5-3 meters away from the car, and automatically locks the door 3-5 meters away from the car11. PKE induction temporary shutdown function12. RFID identification13. Anti-theft alarm function (Illegal opening the door, stepping on the foot brake to trigger an alarm prompt)14. Engine engine lock function (the vehicle cannot be started in the car after the door is locked)15. After starting, step on the foot brake to automatically lock the door, and automatically unlock when the flame is turned off16. Start the automatic lock, turn off the lock automatically17. Original car horn alarm prompt (can add alarm horn)18. Power off memory19. Emergency reset function20. Remotely start and turn off the flame in 10 minutes21.Controlled by mobile phone Bluetooth APP Package Included:1 x Host2 x Remote Control Handle1 x Start Button2 x Sensing Antenna1 x Start Harness1 x Detection Harness1 x Restore Button1 x Manual Q&A : 1.How to find the ACC wire? Please rearrange the 6P cable, after you twist the key to the first gear position (you can listen to music at this time), measure the line that has electricity on your original car is the ACC line. 2. For your 6p cable, but my original car is only 5p. what can i do ? If your original car is a 5P line, the right connection is normally 1 power line, 1 ACC line, 2 ON lines, and 1 start line. If you didn't follow this step, it means you got wrong installation. pls recheck it again. and pls remember 2 ON lines need to distinguish which is ON1 line and which is ON2 line. If the two ON lines are always charged at the time of startup, you need to connect the two ON lines in parallel. 3. How to tell the wire ON1 and ON2? If you test these two ON lines at startup, one of the two that always has power is the ON1 line. And If the other one has instant power is the ON2 wire.