USB Wireless Print Server Wired Wireless Standalone Modes 480Mbps USB2.0 Print Server with 10/100Mbps LAN Bridge for Windows/ for OS X Printers Item Type: USB Wireless Print Server Material: ABS Color: White Output Interface: Bridge (10/100Mbps) Input Interface: LAN (10/100Mbps) Power Port: Micro USB USB Port: USB 2.0 Preparation: 1. Make sure that the printer driver is installed on your computer and that it can print properly. (The simplest way to verify the installation of the driver is to directly connect the computer to the printer and check if it can print correctly, which is the prerequisite for the printer server to work properly). 2. Connect the power of the print server, connect the USB print cable of the printer, and connect the network cable of the local area network to the print server. (Connection diagram is on the packaging box). 3. After the print server is powered on for 3 minutes, use your mobile phone to search for a wireless signal with @MG_XXXX. The wireless password is: 77777777 (8 sevens). A webpage window will automatically pop up on your phone, or you can access webpage with a mobile phone. Setting up on the computer: After completing the above steps, go to the Control Panel on your computer, Devices, Printers and Scanners, select the printer you want to set up, and click on Manage. (To ensure smoothing setup, make sure that the current computer can print properly by connecting it to the printer via a USB print cable, which confirms that the driver is correct). 1. Select Printer Properties. 2. Click on Port, Add Port, Select Standard TCP/IP Prot, Click on New Port. 3. Enter the IP address of the printer server (in the previous teaching how to view the IP address of the printer server through the mobile phone), click following, and wait for 1 minute. 4. Be sure to select Custom 5. Finished and use