DMX512 wireless receiver receives standard DMX512 protocol data wirelessly from a console with reliable signal transmission and no delay. Operates in the 2.4G ISM frequency band. Features high-efficiency GFSK modulation and advanced communication design with 126 automatic frequency channels and strong anti-interference capabilities for stable performance. Supports 7 group ID codes, allowing up to 7 independent wireless networks to operate simultaneously in the same location without interference. LED indicators show status and ID settings: - ID 1: Red - ID 2: Green - ID 3: Yellow (Red + Green) - ID 4: Blue - ID 5: Magenta (Red + Blue) - ID 6: Cyan (Green + Blue) - ID 7: White (Red + Green + Blue) Operation: Press the ID setting button to configure. - LED constantly lit: No wireless signal detected - Red LED flashing: Data transmitting - Green LED flashing: Data receiving RF frequency range: 2400–2525 MHz, with 126 channels and automatic frequency search. Each device must be set to the same ID code (1–7) to establish communication. To pair, power on the receiver first, then the transmitter, and press the button to match the ID. Use different ID values when operating multiple systems in the same area. Red LED flashes if the transmitter is not sending data; adjust the receiver address as needed. Green LED flashes during pairing and increases in flash rate with higher data transmission. Communication is established once matching IDs are confirmed. Color: As shown Package List: 1 x Wireless Receiver 1 x EU Adapter 1 x Specification Sheet (English) Note: Lighting and display differences may cause slight variations in color between the image and the actual item. Measurement error allowance is +/- 1–3 cm.