Description:This LCD Screen FPV receiver monitor with stable performance and clear image quality. Built-in dual receiver automatically for best reception automatic antenna switching, and it can receive 2 different channels at the same time. Small size and lightweight, a simple and effective accessory for FPV drone.Features:1. Built-in dual receiver automatically for best reception automatic antenna switching.2. Can receive 2 different channels at the same time.3. 5 bands and total 40 Channels.4. Built-in battery, easy to carry for outdoor use.5. A key to automatic signal search, simple and easy to operate.6. With stable performance and clear image quality.7. Small size and lightweight, a simple and effective accessory for FPV drone.Specifications:Condition: 100% Brand NewItem Type: FPV Receiver MonitorScreen Size: 7inchResolution: 800 x 480Brightness: 600cd/m2View Angle: 140/120 degree(Horizontal/Vertical)Working Voltage: DC7-16VBattery: Li-Polymer Battery 2000mAH/7.4V(Built-in)Power Consumption: maximum 650mA at 12VBattery Charging Current: 850mA at 12V(maximum)Working Temperature: -10 ~ +65Size: Approx. 180 x 120 x 50mm / 7.1 x 4.7 x 2inch(Note: Sunshield height: 28mm / 1.1inch)Package Weight: Approx. 853gBand and Channel Selection:BandCH1CH2CH3CH4CH5CH6CH7CH8A5865 MHZ5845 MHZ5825 MHZ5805 MHZ5785 MHZ5765 MHZ5745 MHZ5725 MHZB5733 MHZ5752 MHZ5771 MHZ5790 MHZ5809 MHZ5828 MHZ5847 MHZ5866 MHZC5705 MHZ5685 MHZ5665 MHZ5645 MHZ5885 MHZ5905 MHZ5925 MHZ5945 MHZD5740 MHZ5760 MHZ5780 MHZ5800 MHZ5820 MHZ5840 MHZ5860 MHZ5880 MHZR5658 MHZ5695 MHZ5732 MHZ5769 MHZ5806 MHZ5843 MHZ5880 MHZ5917 MHZHow To Use:1) A AV OUT: A receiving AV signal output, it must be in A mode.2) B AV OUT: B receiving AV signal output, it must be in B mode.3) DIVERSITY AV OUT: AV signal output received by DIVERSITY, DIVERSITY mode is required.4) DC / + 12V DC IN, + 12V power supply, the working current of the device is 650Ma @ 12V, the maximum charging current of the built-in battery is 800mA @ 12V; if the device is working while charging, please pay attention to choosing a charging device with a rated current greater than 2A / 12V .5) The battery has a built-in 7.4V 2000mAH high-capacity polymer battery. When the battery is charged, the unit marked with the battery in the lower left corner of the device will light up after the charge is completed, here is a bright green LED; If not used for a long time, please charge the device every four months to protect the battery.Package Include:1 x FPV Receiver Monitor1 x Adapter2 x Antenna1 x Audio Cable1 x Cable1 x Wiping Cloth1 x ManualNote:1. Dear customer, Please rest assured to buy without worrying about the plug adaption. We will provide an adapter for you according to different country standard and ensure its normal use.2. If the device is not used for a long time, please charged once every four months in order to protect the battery..3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.