["Specifications:\r\nBrand Name: ANENG\r\nModel Number: Q1\r\nOperating Temperature: 0 - 40 ℃\r\nOperating Humidity: ≤75%RH\r\nStorage Condition: -20~60℃\r\nStorage Humidity: ≤80%RH\r\nDIY Supplies: Electrical\r\nOperating Mode: Auto/Manual Ranging\r\nMeasuring Inductance Range: no\r\nMeasuring Temperature Range: -20~1000 C/-4F-1832F \r\nMeasuring Capacitance Range: 9.99nF/99.99nF/999.9nF/9.99uF/99.99uF/999.9uF/9.999MF\r\nMeasuring Voltage Range: 999.9mV/9.999V/99.99V/999.9V\r\nMeasuring Current Range:999.9uA/99.99uA/999.9mA/10A\r\nMeasuring Resistance Range: 99.99/999.9/9.999k/99.99k/999.9K/9.999M/99.99M Ohm\r\nFrequency: 99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/5MHz\r\nDisplay Type: Digital Display\r\nDiode Test: Yes\r\nContinuity: Yes\r\nDuty Cycle: 1%-99%\r\nSample Rate: 3 times per second\r\nPower: 2 * 1.5V AA batteries(Not Included)\r\n \r\nNotes:\r\n1. Do NOT exceed the “maximum value” indicated in the Specification;\r\n2. Do NOT input voltage at the Current Mode, the Resistance Mode, the Diode Mode, the Continuity Mode, or the Temperature Mode;\r\n3. Do NOT use the product when the batteries or the battery cover is not placed properly;\r\n4. Turn off the product and remove the test leads from the test points before changing batteries or fuses.\r\n5. Do not input voltage exceeds 36V for DC or 25V AC when you are at the setting of measuring current.\r\n \r\nPackage includes:\r\n1 x Multimeter \r\n2 x Test lead\r\n1 x Temperature sensor\r\n1 x User Manual\r\n1 x Storage bag\r\n1 x 16pcs Test probe"]