Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Autopilot with 4G SD Safety Switch Buzzer PPM I2C RC Quadcopter Ardupilot

169,00 €
+ 11,99 € Envio

Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Autopilot with 4G SD Safety Switch Buzzer PPM I2C RC Quadcopter Ardupilot

  • Marca: unbrand
Vendido por:

Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Autopilot with 4G SD Safety Switch Buzzer PPM I2C RC Quadcopter Ardupilot

  • Marca: unbrand

169,00 €

Economize 40,00 € (19%)

PVP

209,00 €
Em stock
+ 11,99 € Envio
Vendido por:

169,00 €

Economize 40,00 € (19%)

PVP

209,00 €
Em stock
+ 11,99 € Envio

Aceitamos as seguintes formas de pagamento

Descrição

The product has passed strict CE certification. If you need a PDF or more complete test certificate, please leave a message. Note: 1.You can select White or Black shell of PIXHAWK flight controller, the hardware is same .White shell is more beautiful. If you need White shell, please leave a message. 2.If the package has3DR power Module,by default we will send XT60 plug 3DR power Module,if you need T ,please leave a message. 3. Pixhawk has many packages.We will send the package as you select. Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller Features: Pixhawk 2.4.8 support the latest official ardupilot firmware and PX4 firmware. 1. The advanced 32-bit ARM CortexM4 high-percompatible for mance processors STM32F427VIT62MB flash, can run NuttX CHIBOS RTOS real-time operating system; 2. 14 PWM / servo output; 3. Bus interface UART, I2C, SPI, CAN; 4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe; 5. Provide automatic and manual modes; 6. Provide redundant power input and failover; 7. Multicolor LED lights; 8. Provide multi-tone buzzer Interface 9. Micro SD recording flight data; Specifications: Interface 1 .5 high voltage compatible UART 1, 2 with hardware flow control 2. 2 CAN 3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input 4.Futaba SBUS compatible inputs and outputs 5.PPM Signal Input 6.RSSI PWM or voltage Input 7.I2C 8.SPI 9.3.3 and 6.6VADC input 10. External MICRO USB Interface If the package includes the 3DR Power Module, the current hardware of the 3DR Power Module has been fully upgraded. Previously, it only supported a maximum of 6S, but now it supports a maximum of 12S. By default, XT60 plug is sent. If XT90 plug is required, please leave a message. Radio telemetry V5 can be used compatible for wireless communication between pixhawk and computer or mobile phone. Radio telemetry V1 WIFI V1.0 and V2.0 use 8bit CPU, only support UDP WIFI V3.0 use 32 BIT CPU, support TCP and UDP. WIFI V2.0 and V3.0 use external antenna 5DB M9N GPS Module M9N is a GPS module commonly used in unmanned aerial vehicles, with the following characteristics and applications: High precision positioning: The M9N adopts advanced GNSS technology, supports multiple satellite navigation systems, and can provide high-precision position positioning incompatible for mation. compatible for unmanned aerial vehicles, it can achieve accurate positioning and navigation. Multi system support: The M9N supports multiple satellite navigation systems, including GPS, GLONASS, Galileo, BeiDou, etc. This allows drones to receive multiple satellite signals simultaneously, improving positioning accuracy and reliability. PX4FLOW Optical Flow Sensor Smart Camera PX4FLOW Optical Flow Sensor Smart Camera compatible for PX4 PIXHAWK Flight Control System MB1043 Introduction: - PX4Flow is an optical flow smart camera. It has a native resolution of 752-480 pixels and calculates optical flow on a 4x binned and cropped area at 250 Hz bright, outdoors, giving it a very high light sensitivy. Unlike many mouse sensors, it also works indoors and in low outdoor light conditions without the need compatible for an illumination LED at 120 Hz dark, indoors. It can be freely reprogrammed to do any other basic, efficient low-level computer vision task. Hardware Specifications: - STM32F405, 168 MHz Cortex M4F GFLOPS 128 + 64 KB RAM - 752-480 MT9V034 image sensor, L3GD20 3-axis Gyro - 4 mm M12 lens IR block filter - Size 45.5 mm x 35mm - Power consumption 115mA / 5V Package list: - PX4FLOW Optical Flow Sensor Smart Camera ,MB1043 ultrasonic moudle x 1 - Connecting cable x 1 OLED Module can display some message. MINI OSD PDB: VTX1000 is video transmitter,support 25MW-600MW,48 channel with heat sink abd 3DB antenna FPV Camera 450 Carbon Fiber Frame BLHELI ESC: A. Features A1: Use authentic electronic components to ensure high quality and enhance the current endurance ability of the ESC. A2: Based on BLHeli firmware, optimized compatible for high percompatible for mance with great linearity and much quicker throttle response. A3: Special designed compatible for multirotors, and compatible with fixed-wing aircrafts and helicopters. A4: Multiple protection features including Low-voltage cut-off protection / over-heat protection / throttle signal loss protection. A5: Throttle range can be configured and is fully compatible with all receivers, providing smooth, linear and precise throttle response. A6: All parameters can be programmed via using a transmitter, including default settings. B. Productspecification 2212 920KV Motor 1045 Propellers
  • Identificação da Fruugo: 352540446-767657213
  • EAN: 9013978423338

Informações de segurança do produto

Consulte as informações de segurança do produto específicas para este produto descritas abaixo

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Etiquetas de segurança do produto

CE Mark
Avisos de segurança: Important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.

Entrega e Devoluções

Enviado dentro de 24 horas

  • STANDARD: 11,99 € - Entrega entre segunda 24 novembro 2025–terça 02 dezembro 2025

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Xinxiang Jintang
  • Xinxiang Jintang
  • Muyequhonglidadaowuhuanjiayuan7
  • xinxiang
  • CN
  • 453000
  • mychen2012@163.com
  • 13226730770

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch.
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 682797075