1. 2.13-Inch Capacitive Touch Ink Screen, 250x 122 Resolution2. Supports 5-Point Touch And Custom Gesture 3. No Backlight Is Required, And The Display Content Of The Last Screen Can Be Maintained For A Long Time When The Power Is Turned Off.4. The Power Consumption Is Very Low, Basically Only Consuming Power When Refreshing.5. Based On Raspberry Pi40pin Gpio Interface Design, Suitable For Zero / Zero W And Other Two Main Control Boards1. Working Voltage: 3.3V2. Communication Interface: 3-Wire Spi, 4-Wire Spi3. Partial Refresh: 0.3s4. Overall Dimensions: Approximately 69.15 x 38.90mm5. Display Size: About 48.55x23.70mm6. Global Refresh: 2s7. Refresh Power Consumption: 26.4mw(Typ.)8. Point Pitch: 0.194x0.194mm9. Sleep Current: Less than 0.01ua (Near 0)10. Resolution:250*122pixels11. Viewing Angle: 17012. Touch Points: 513.Colour:As Shown14.Material:ABS Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The UsePackage Contents:1 x 2.13-Inch Touch Electronic Screen1 x Upper And Lower Shell1 x Screwdriver1 x Thermal Conductive Silicone Sheet4 x Anti- Rubber Particles2 x Flat Head ScrewsOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.