Fangrui Product Details 1. For Insta360 One X2 Compatible Disassembled Lcd Screen Digitizer Full Assembly With Middle Frame 2. Middle Frame Bezel With Lcd Display + Touch Screen Digitizer Assembly For Insta360 One X2. 3. This Part Is Used To Your Damaged Or Unworkable One With A New One. 4. Each Item Has Been Checked And In Good Condition Before Shipping. 5. Completely Fit And Work. 6. The Installation Of Any New Part Should Be Done By A Qualified Person. We Will Not Be Responsible For Any Damage Caused During Installation. 7. Before Installation Notes 8. Tips 1: Test Before Installation 9. When Testing, Do Not Remove Any Protective Film Or Tags. Please Pay Attention To The Problem Of Static Electricity. 10. Before Attempting Any Repair, Be Sure To Ground Yourself Is An Esd (electro Static Discharge) Strap. This Will Prevent Static Electricity From Damaging The Electronic Components Within The Device. 11. Ensure You Wear Eye Protection And Use Caution Not To Cut Your Finger With The Glass Splinters. 12. Tips 2: Simulates Testing 13. Screen Is Very Fragile Product. We Strongly Suggest Test Before Installation. Please Simulates Testing, Which Means Device Apart, (motherboard + Lcd Or Screen) Connected Audio Cable And New , Power On, Test Finished. If Test Ok, Please Install It. If It Can Not Show, Please Contact Us At The Very First Time. And Please Do Not Force It To Be Installed In Device. We Will Not Be Responsible Once The Screen Is Installed. 14. Tips 3: Do Not Over-bend Cable 15. Please Make Sure Lcd Cable Do Not Over-bend. Over 90 Degrees Bent Will Cause Black Display.