Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

79,00 €
+ 5,99 € Envio

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • Marca: Unbranded
Vendido por:

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • Marca: Unbranded
Preço: 79,00 €
Vendido por:
79,00 €
+ 5,99 € Envio

Em stock

Aceitamos as seguintes formas de pagamento

Descrição

Oxygen Inhaler Wall Entry Buoy Type Oxygen Filter Flow Meter Meter Oxygen Supply Parts Item Type: Oxygen Inhaler Flow Range: 1~10L/min, 1~15L/min Input and Output: 0. 4MPa~0.5MPa Exhaust Pressure of Safety Valve: 0.17MPa±0.05MPa How e:1. When using the inhaler, fill the inhaler bottle with distilled water first. It is forbidden to replace it with physiological saline. The water level in the inhaler bottle is between the upper and lower water levels. Tighten the inhaler bottle. 2. Before inserting the inhaler into the oxygen supply terminal socket, turn off the flow adjustment switch, and then insert the quick plug into the oxygen supply terminal socket hole. When you hear a "click" sound and see the oxygen supply terminal socket locking sleeve automatically slides , It means that the quick plug and the oxygen supply terminal socket have been connected and locked 3. Before supplying oxygen, insert the oxygen inhalation tube (purchased separately) into the oxygen supply connector, and then turn the flow adjustment switch counterclockwise to turn on the air source to make the float rise slowly (the scale line aligned with the center of the float is the flow reading, unit Is liters/min), the oxygen supply can be adjusted as needed 4. During the oxygen supply process of the inhaler, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be closed in time, the humidification bottle should be unscrewed, and distilled water should be added according to the requirements of Article 1 of this item. Screw on the body of the inhaler and continue oxygen supply. 5. When the inhaler is out of use, the air source of the inhaler should be turned off; if it needs to be removed, hold the inhaler with one hand and unlock it with the other hand and then remove it (the unlocking method of the different oxygen supply terminal sockets is explained by the engineering installation unit ). Then pour out the water in the bottle for cleaning and disinfection, and store it in a non-corrosive gas and well-ventilated room.
  • Identificação da Fruugo: 413728961-874299789
  • EAN: 4081337801405

Entrega e Devoluções

Enviado dentro de 24 horas

  • STANDARD: 5,99 € - Entregue por sexta 10 outubro 2025

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • BantianjiedaoxiangjiaotangshequzhonghaogongyechengC2dongwuceng505
  • Longgangqu
  • Shenzhenshi
  • Guangdongsheng
  • China
  • 518000
  • Wallace22578@outlook.com
  • +8613084447403

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM.1.PLANTA 1,DERECHA.OFICINA3.Fuenlabrada.
  • Madrid
  • Spain
  • 28947
  • successservice2@hotmail.com
  • +34910602659