Feature: 1. Solar DC to AC, can drive motors and motors, and can completely replace photovoltaic inverters. 2. Built-in MPPT controller, automatic start and stop. 3. Adopt 24V DC cooling fan, external aluminum cooling base, efficient heat dissipation. 4. Humanized operating, highlighting the red digital tube display to avoid misoperation. 5. ABS fire proof and heat proof plastic shell, surrounded by terminals, safe to use. Specification: Item Type: Solar Inverter Brand: NFLIXIN@ Model: 9100-1T-00075DB / 9100-1T-00150DB / 9100-1T-00220DB (optional) Adapted Motor Power: 0.75KW / 1.5KW / 2.2KW (optional) Rated Current: 4A / 7A / 10A (optional) Input Voltage: DC200-400V Output Voltage: 3PH AC0-220VAC 0-600Hz Output Voltage Adjustment Method: PWM control Control Mode: Voltage vector Protection Level: IP20 Installation Method: Wall-mounted Size: Approx. 155 x 135 x 82mm / 6.1 x 5.3 x 3.2in Built-in MPPT Controller: MPPT: The full name is "Maximum Power Point Tracking" (Maximum Power Point Tracking), which can detect the generated voltage of the solar panel in real time and track the highest voltage and current value (VI), so that the system drives the load with the maximum power output, which is applied to the solar photovoltaic system In the coordination of the work between the solar panel and the load, it is the brain of the photovoltaic system. Features: 1. The DC voltage input range is 200-400V (lower than 200V will trip low voltage alarm and stop, above 400V will automatically suppress the voltage rise to avoid overvoltage trip and stop) 2. Unattended, automatic start and stop. (In the morning, when the light intension reaches the input voltage of 200V, the photovoltaic inverter automatically starts to drive the load to run, without thinking of the operating, In the evening, when the light intension decreases and the input voltage drops below 200V, the photovoltaic inverter will automatically stop driving the load and no human operating is required) Application: 1. The drive motor motor equipment can completely replace the photovoltaic inverter (important selling point). 2. DC to AC places. 3. Photovoltaic inverter can just be used to drive motor and motor loads. 4. Solar power generation, motor water pump drive.. Package List: 1 x Solar Photovoltaic DC Inverter 1 x English Manual Note: 1. The default upper limit frequency of this solar photovoltaic inverter is 50Hz, and the reversal function is turned off by default.2. The DC input voltage should conform to the recommended voltage as much as possible, otherwise it will reduce the solar energy conversion rate.3. The AC input and DC input switches cannot be closed at the same time, otherwise the inverter or solar panel will be damaged.4. Do not overload the inverter. For example, the inverter power is lower than the motor power, or the ordinary motor is greater than 50HZ. Otherwise, the inverter will frequently skip the load protection failure, or even blow the machine. The motor may also be burned due to overheating. If it is not used as required, the inverter after‑sales service will be refused.5. The special inverter for solar energy is suitable for the load of motors such as fans and pumps driven by solar photovoltaic panels. The type selection can be matched according to the motor voltage and power. If the water depth of the submersible pump is more than 30 meters, it is recommended to enlarge the optional inverter of one or two stages, and add a reactor between the inverter and the pump. Otherwise, the service life of the inverter will be reduced.7. Regarding how to connect solar panels, such as 220V motors, the total voltage of solar panels connected in series needs to meet 200V‑400V. 380V motors, and the total serial voltage needs to meet 400V‑700V. The power is that the total power of several solar panels connected in series is more than 1.2 times greater than the power of the inverter.