OBD2 Plug and Play AdBlueOBD2 Emulator for IVECO Trucks - Comprehensive Solution for EU4/5 Emissions Compliance

49,95 €
+ 7,49 € Envio

OBD2 Plug and Play AdBlueOBD2 Emulator for IVECO Trucks - Comprehensive Solution for EU4/5 Emissions Compliance

  • Marca: Unbranded
Vendido por:

OBD2 Plug and Play AdBlueOBD2 Emulator for IVECO Trucks - Comprehensive Solution for EU4/5 Emissions Compliance

  • Marca: Unbranded

49,95 €

Economize 49,05 € (49%)

PVP

99,00 €
Em stock
+ 7,49 € Envio
Vendido por:

49,95 €

Economize 49,05 € (49%)

PVP

99,00 €
Em stock
+ 7,49 € Envio

Aceitamos as seguintes formas de pagamento

Descrição

OBD2 Plug and Play AdBlueOBD2 Emulator for IVECO Trucks - Comprehensive Solution for EU4/5 Emissions Compliance

AdBlueOBD2 for IVECO adBlue/DEF and NOx Emulator via OBD2 Plug and Drive Ready Device! 1.Drive your truck without Diesel Exhaust Fluid! 2.ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors. 3.Without any power loss of the engine or any warnings on the dashboard and in diagnostic system AdblueOBD2 Emulator for IVECO Trucks Plug and Drive Ready Device by OBD2 Top 5 Reasons to Get AdblueOBD2 Emulator for IVECO Trucks: 1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned. 2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors. 3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system. 4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting. 5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector. AdblueOBD2 Emulator for IVECO Trucks adBlueOBD2 is a PlugandDrive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install. Installation and Calibration for IVECO Trucks: 1. Pull the Key out from the ignition. 2. Remove the following Fuses (For IVECO) Terminal - 5 Terminal - 15 3. Plug adBlueOBD2 into OBD2 connector 4. Turn on the ignition and check the level of adBlue, if it shows 50 percent or 70 percent . 5. If any fault light appears on dashboard, delete via service scanner. Legal Notice AdBlue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use adBlue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your adBlue/DEF tank. Package including: 1pc x adBlueOBD2 Emulator Box Interface 1pc x User Manuel English Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • Identificação da Fruugo: 445718861-936079031
  • EAN: 9074782450040

Entrega e Devoluções

Enviado dentro de 2 dias

  • STANDARD: 7,49 € - Entrega entre sexta 19 dezembro 2025–sexta 26 dezembro 2025

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Hefei Zheshuo Technology Co., Ltd.
  • Hefei Zheshuo Technology Co., Ltd.
  • Hefei City, Anhui Province, Shushan District, Anhui Province, No. 15, South Seventh Street, South Cooperative South Road, Chemical Machinery Community, Building 1, Unit 2, 603
  • Hefei
  • CN
  • 523011
  • nacufalacan81@hotmail.com
  • 13243801962

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901