New PN532 NFC RFID Module V3 Kits Reader Writer Board For Android Phone

24,95 €
Envio GRATUITO

New PN532 NFC RFID Module V3 Kits Reader Writer Board For Android Phone

  • Marca: Unbranded
Vendido por:

New PN532 NFC RFID Module V3 Kits Reader Writer Board For Android Phone

  • Marca: Unbranded

24,95 €

Em stock
Envio GRATUITO

Política de Devoluções de 14 Dias

Vendido por:

24,95 €

Em stock
Envio GRATUITO

Política de Devoluções de 14 Dias

Métodos de pagamento:

Descrição

New PN532 NFC RFID Module V3 Kits Reader Writer Board For Android Phone

We've taken our popular PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The mini NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities, our library currently only supports reading/writing tags, and does not support phone-to-shield communication, tag emulation (which requires an external 'secure element' only available from for NXP) or other more advanced features at this for time. NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range Bluetooth-compatible that doesn'for t require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC.Because it can read and write tags, you can for always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other for NXP for MiFare type tags) The mini shield was designed by RF engineers using the best test equipment to create a layout and antenna with 5cm range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier. This shield is designed to use I2C or SPI communication protocols. SPI is the default, It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB. for any "classic" NG, Diecimilla, Duemilanove, UNO - as well as Mega R3 or later. For using the I2C interface with Mega R2 or earlier, two wires must be soldered as the I2C pins are in a different location on earlier Megas. Size: See the picture No retail package Quantity: 1Pc Note: Due to the difference between different monitors, the picture may not reflect the actual colorof the item. Thank you!!!!
  • Identificação da Fruugo: 146637812-309184361
  • EAN: 8461002394597

Informações de segurança do produto

Consulte as informações de segurança do produto específicas para este produto descritas abaixo

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Etiquetas de segurança do produto

CE Mark

Entrega e Devoluções

Enviado dentro de 24 horas

  • EXPRESS: GRÁTIS - Entrega entre sexta 16 janeiro 2026–segunda 26 janeiro 2026 - GRÁTIS

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Shenzhenshisanyuelikejiyouxiangongsi
  • Shenzhenshisanyuelikejiyouxiangongsi
  • A401, No. 357, Yulu Village, Gongming Street, Guangming New District, Shenzhen
  • shenzhen
  • CN
  • 518000
  • mingxuanzhaoming@outlook.com
  • +19168536526

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • CrossStYAting
  • INVALID
  • 69 Mainzer Landstrasse
  • Frankfurt am Main
  • Germany
  • 60329
  • E-crossstu@web.de
  • +4969332967674