Feature: 1. APPLICABLE SCENARIO: RF transceiver is a RF device for penetration testing and Red, an essential device for professionals and cybersecurity enthusiasts 2. TRANSMITTING AND RECEIVING MODULE: The RF adapter with 2 CC1101 RF module can be configured to transmit or receive on different frequencies simultaneously, and there is also an NRF24L01 module for others 3. WIRELESS CONFIGURATION: The basic firmware allows the reception and transmission of basic signals, and you can configure this radio module via the network panel over WiFi 4. MULTIPLE FEATURES: Recommended for testing, learning and entertainment, the RF adapter allow signal receivers, signal transmitters, attacks, URH resolution, mouse hijacking 5. FREQUENCY BAND: The working radio frequency band supports 300Mhz‑348Mhz, 387Mhz‑464Mhz, 779Mhz‑928Mhz, 2.4GHz Specification: Item Type: RF Transceiver Material: PCB Working Radio Frequency Band: 300Mhz-348Mhz, 387Mhz-464Mhz, 779Mhz-928Mhz, 2.4GHz Basic Firmware: Basic firmware allow receiving and sending basic signals. You can configure two radio modules via the network panel via WiFi RX: Configure the receiving module and frequency TX: Configure the module, frequency, code, and bit length to be sent Crack: Set the crack frequency, start code, and bit length. Package List: 1 x RF Transceiver Note: 1. All devices are loaded with the basic firmware for Evil Crow RF V2 before shipping.2. You can develop code for Evil Crow RF V2 and send PR with your new code.