The output of the AO2 sensor changes with temperature, but the thermistor is gradually integrated to compensate for these changes. The thermistor helps provide the AO2 with a stable output over a wide temperature range. The AO2 PTB-18.10 oxygen sensor used in the oxygen index meter is a consumable item. When it comes into contact with air, a chemical reaction begins. AO2 Product Parameters: (1) Output: 9-13mV in air (2) Range: 0-O2 (3) Accuracy: 0.01%O2 (4) Expected service life: 360,000%O2 hours at 20°C, 286,000%O2 hours at 40°C, or two years in air at STP (5) T90 response time: Less than 5 seconds (6) T99.5 response time: Less than 40 seconds (7) Oxygen signal: 100% (8) Linearity: 0-O2 (9) Zero offset: Less than 20μV (10) Temperature range: -20 to +50°C (11) Temperature compensation: Less than 2% variation from 0 to 40°C (12) Differential pressure range: 0-500mbar Max (13) Absolute pressure range: 500-2000mbar (14) Relative humidity range: 0-99% non-condensing (15) Long-term output drift: Less than 10% signal loss per year (16) Recommended load resistance minimum: 10kohm Note: Due to different production batches, the product appearance may vary slightly, which does not affect performance. Color: Red Material: Plastic Package Contents: 1 x Oxygen Sensor Only the above package content; other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The measurement allowed error is +/- 1-3cm.