PLC Industrial Control Board FX1N-10MT Programmable Relay Delay Module With ShellFeatures:1. .2. Small body and stable performance.3. This module is programmable and can realize thousands of functions.4. The working performance is stable and reliable5. Built-in timing circuit can effectively ensure the long-term operation of the moduleSpecification:Condition: Model: FX1N-10MTworking Voltage:24VDC Power Supply:10-28VDC Weight: Approx. 59g/2.1ozFeature:1. Turn on the power, relay 1 is c-randomized after N seconds of closing; Then relay 2 is c-drawn after N seconds of closing.2. Turn on the power, relay 1 is off after N seconds of closing; Then relay 2 is off after N seconds, followed by cycles.3. When the power is turned on, relays 1 and 2 are not activated. When there is a signal or a button is triggered, relay 1 is off after N seconds is c-lost; then relay 2 is turned off after N seconds and then off until the n-ext trigger, repeating the same action. By programming signals 1, 2, any control of relays 1 and 2.4 can be achieved. When signal 1 has a signal, relay 1 is c-randomized, and relay 2 is off; 5. When signal 2 has a signal, relay 1 is off and relay 2 is c-losted.6. Only the NPN sensor signal can be connected, and the sensor signal can be programmed to realize any relay control.7. When signal 1 has a trigger, control relay 1; When signal 2 has a trigger, the control relay 2.8. Turn on the power, control the motor to rotate for N seconds, and then reverse N seconds and cycle.9. When signal 1 has a signal, the motor is controlled to rotate forward; When signal 2 has a signal, the motor is reversed. Package List:1 * Relay Module