CP2112 highly integrated USB to SMBus bridge controller integrates a USB2.0 full-speed function controller, USB transceiver oscillator and 8 GP10 pins.<br>via a simple GUI-based Single configurator selects all customization and configuration options, eliminating the need to develop complex firmware for standard HID class devices Supplied with software and drivers<br>the CP2112 device enables fast USB connectivity with minimal development effort.<br>1. USB bus powered 4.0 to 5.25V<br>2. Self-powered 3.0 to 3.6V, I/0 voltage 1.8V to<br>3. Working environment temperature: -40°C~85°C<br>4. On-chip reset circuit, on-chip voltage regulator: 3.45V output<br>5. Comply with USB specification 2.0 standard, full speed (12Mbps)<br>6. Support USB suspend state through SUSPEND pin<br>7. Integrated 194-byte one-time programmable ROM for storing customizable product information<br>8.512-byte SMBus data buffer, configurable clock speed device address 7-bit value .<br>CP2112 slave device address<br>9. for , and Linux HID to SMBus library for rapid application development , open river access interface specification<br>10. 8 GPIOs configurable as input/output and open drain/push-pull for external devices<br>Configurable clock output 48MHz to 94KHZ, read/write SMBus device toggled LED<br>11. Application areas: portable controller, USB dongle, data recording<br>Material: plastic+metal<br>colour:<br>Package Contents:<br>1 x module<br>2 x row pins<br>Only the above package content, other products are not included.<br>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.