Frequency To Voltage Converter Module 0-10khz To 0-10v Digital To Analog

17,34 €
+ 16,33 € Envio

Frequency To Voltage Converter Module 0-10khz To 0-10v Digital To Analog

  • Marca: unbrand

Frequency To Voltage Converter Module 0-10khz To 0-10v Digital To Analog

  • Marca: unbrand
PVP: 21,72 €
Preço: 17,34 €
Poupa: 4,38 € (20%)
Vendido por:
17,34 €
+ 16,33 € Envio

Em stock

Aceitamos as seguintes formas de pagamento

Descrição

Description: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control. Features: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds. The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Suitable for the switching of the PLC and the frequency converter. This module is easy to wire and convenient to use. Signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence. Specification: Output current: 5MA Voltage: 0-10V Input pulse level: 5V 12V 24V Frequency: 0 to 10KHZ Size: Approx. 4.5 x 4.5cm / 1.77 x 1.77inch Weight: 18g Quantity: 1pc Use: Multi-circle potentiometer board is used to calibrate the correspondence of the frequency and voltage. Input supply voltage range of 12-30V DC.(The voltage of 15-24V is recommended) When the electricity level is 12V, the power supply voltage can NOT be 12V. It's better more than 15V. When the electricity level is 24V, the power supply voltage can be 24V. Signal inputs with optical coupling isolation. To ensure that the capability of anti-interfence. For use with PLC supported NPN type. Must have a ground wire. For with encoder requires constant speed of the encoder continuously rotate more than 0.5 seconds. Frequency/ Voltage converter module, the response time is about 0.3-0.5 seconds. If the signal input is turbine flow and so on, an 817 optical coupler and a resistor were needed to match the flow meter normally because of the signal match. Corresponding relationship: When the F / V with the resistance transferred to an intermediate value, F / v corresponding to the following relationship, 100HZ = 0.1V, accuracy is 1%. It can not reach to 2 digits after the decimal point if relatively high precision of the occasion is not enough. 0.1V = 100HZ 500HZ = 0.5V 1KHZ = 1V 2KHZ = 2V 3KHZ = 3V 4KHZ = 4V 5KHZ = 5V 6KHZ = 6V 7KHZ = 7V 8KHZ = 8V 9KHZ = 9V 10KHZ = 10V Each 0.1V DC of correspondence between the frequency 100HZ. When the correspondence if allowed, can be corrected to adjust to the board potentiometer. Package List: 1 x Frequency to Voltage Converter
  • Identificação da Fruugo: 363047969-788035793

Entrega e Devoluções

Enviado dentro de 24 horas

  • STANDARD: 16,33 € - Entrega entre quarta 08 outubro 2025–quarta 15 outubro 2025

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Quanzhou Weiting Trading
  • Quanzhou Weiting Trading Co., Ltd.
  • Jinjiangshixiyuanjiedaochecuoshquhuangcuoxincun2hao
  • Quanzhou
  • CN
  • 360000
  • 15814841829@163.com
  • 15814841829
  • https://www.fruugo.co.uk/quanzhou-weiting-trading/m-18838

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • MJCM SARL
  • MJCM SARL
  • 78 avenue des Champs Elysees Bureau 326
  • Paris
  • France
  • 75008
  • mjcm190928@gmail.com
  • 0033 767213611
  • https://kdocs.cn/l/cie0TMMnPUqV