Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

59,00 €
+ 16,99 € Envio

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Marca: Unbranded

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Marca: Unbranded
PVP: 179,00 €
Preço: 59,00 €
Poupa: 120,00 € (67%)
Vendido por:
59,00 €
+ 16,99 € Envio

Em stock

Aceitamos as seguintes formas de pagamento

Descrição

1Welding power can be powered by lithium battery or 12V car battery. 2The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters. 3The soldering pen and the input wire are connected by Ushaped coldpressed terminals, which is convenient for disassembly and replacement. 4The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage. 5The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multiwire soft wire to increase the overcurrent capacity. 6Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion. 7The controller is mainly for welding 0.1mm to 0.15mm nickelplated steel strip, and the power input adds a 25V10000uF highfrequency lowresistance capacitor for energy compensation to increase stability.Item Type: Mini Spot WelderProduct Description:1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.2: This controller requires users to have a certain electronic basis and safety awareness.3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm nickel-plated steel strip and 0.15mm nickel-plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm nickel-plated steel strip perfectly. Note that it is a car battery, not an ordinary lead-acid battery.Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in1 x Spot Welder1 x Connector2 x Power Input Line2 x Soldering PenPlease note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
  • Identificação da Fruugo: 341577521-748850994
  • EAN: 653582880708

Informações de segurança do produto

Consulte as informações de segurança do produto específicas para este produto descritas abaixo

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Etiquetas de segurança do produto

CE Mark
Avisos de segurança: Not suitable for children under 36 months, Adult supervision recommended

Entrega e Devoluções

Enviado dentro de 3 dias

  • STANDARD: 16,99 € - Entrega entre segunda 06 outubro 2025–segunda 13 outubro 2025

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Chengdu Qingbin Tai Trading Co., Ltd
  • Chengdu Qingbin Tai Trading Co., Ltd
  • No. 1309, 13th Floor, Unit 1, Building 2, No. 68, Zhiquan Section, East Street, Jinjiang District, Chengdu City, Sichuan Province
  • Chengdu
  • China
  • 610065
  • chenghduyubin5542@outlook.com
  • 86 134 21832945

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • REP Europe GmbH
  • REP Europe GmbH
  • Prinzenallee 7
  • Düsseldorf
  • Germany
  • 40549
  • info@rep-europe.de
  • 49 155 60128437