Feature: - Oil Pressure Gauge: 0-10Bar,0-150PSI - Water Temp Gauge: 40-120Celsius, 100-250 Fahrenheit - Fuel Level Gauge: 0-190ohm/240-33ohm - Volt: 8-16V - Oil Press Sensor: 1/8NPT - Water Temp Sensor: 14mm, 17mm,21mm,M14,M16,1/8NPT - Fuel Level Sensor Length: 100-600mm - Fuel Level Sensor Signal: 0-190ohm,240-33ohm - Oil pressure sensor 10~184ohm - Temperature sensor 301 ~22ohm Environmental: Operating Voltage 9 to 32 Volts(DC) Power Consumption 95C alarm 4.Voltage < 11.5V alarm about Fuel level Gauge Signal: 1Default input signal is 0~190ohm, when 7-Greenconnect to Ground, input signal change to 240~33ohm; 2Default input signal is 240~33ohm, when 7-Greenconnect to Ground, input signal change to 0~190ohm. Package: 1PCS Gauge+Cable+Manual or 1PCS Sensor Fuel level Sensor: - Protection ank: IP67 - Resolution range: 21 mm - Assembly: SAE standard 5 holes - Rated current for alarm switch: 500mA - Operating temperatures: - 40 to 85 Celsius - Fit for Fuel Level Gauge and Water Level Gauge - Sensor Length :150mm, 200mm, 250mm, 300 mm ,350 mm ,400mm, 450 mm - Mounting: 5 pieces of M5 screws and 2 mm thick gasket - Output signal: 0~190 ohm (Standard European), fit for water /Fuel Level Gauge: 0-190ohm - Fitment: for Gasoline, diesel, methanol fuel, ethanol fuel Connection: - the blue wire of sensor is connect the Ground line, - the brown wire of sensor is connect the gauge Attention: - Empty oil level : 0 ohm / - Full oil level : 190 ohm - When the oil / water level is empty , there will be a space of 3-15mm between the sensor float and the bottom of the sensor. This is a safe distance, and the sensor can work normally,Thank you~ - When the oil / water level is full, there will be a space of 3-15mm between the sensor float and the top of the sensor. This is a safe distance, and the sensor can work normally, Thank you~ Package: 1 PCS Sensor+manual Can Customized: