Our Malleable Dental Gel Sets Contain Polyvinyl Alcohol And Polyvinyl Alcohol Cross-Linked Polymers. It Can. Its Usage Method Is Very Simple :1. Prepare The Materials. Place The Powder And Liquid In A Ratio Of 2:1 On A Glass Plate Or Smooth Paper (In Actual Operation, A Slightly Larger Powder Ratio Will Result In Better Bonding Strength And Hardness). 2. Dental Treatment Is Carried Out. The Teeth Are Cleaned, The Surface Of The Teeth Or The Cavities Are Cleaned (Use A Probe To Remove Internal Residues), And Dried (Dry With A Cotton Ball). Note: After Drying, The Cavities Must Not Be Contaminated By Saliva Again. Use A Cotton Ball Or A Tissue Roll To Separate The Tongue, Cheek And The Teeth. 3. Mix The Material With The Dental Lens Handle (This Is A Plastic Handle. Remember Not To Use Metal Tools To Adjust It, As Metal Will React With The Material (Causing The Material To Change Color). Thoroughly Mix The Powder And Liquid. 4. Fill The Mixed Material With The Handle Of The Dental Lens. After Placing The Material Into The Hole, It Is Trimmed With A Dental Probe. Let It Cure For About 1 Minute. Use A Probe To Scrape Off The Excess Material On The Surface Of The Teeth. After Adjustment, Immediately Adjust The Height And Remove The Excess Material With A Wet Cotton Ball. Twenty-Four Hours After Filling, The Affected Side Can Be Forced To Bite. And It Can Accurately Conform To The Contour Of The Oral Cavity And Fit Comfortably.