<p>1. This light is designed to replace the drain plug on the boat and attracting fishes in seawater.</p> <p>2. Stainless steel housing materials, 100% anti-corrosion</p> <p>3. Standard 1\/2inch NPT thread type, connected with 1.25 meters cable</p> <p>4. Connected with waterproof connector in order to easy installation, no drilling hole are needed, just screw it into the holes on your boat</p> <p>Name:boat underwater light</p> <p>Voltage:12v DC</p> <p>LED's:9 leds</p> <p>Power:total 12W</p> <p>IP Rating: IP68 waterproof</p> <p>Thread: 1\/2 NPT</p> <p>Brightness:1200LM</p> <p>Size:cord length 120-125cm</p> <p>Compatible with:Boats\/yachts</p> <p>Installation instruction:</p> <p>1. Loosen the drain light</p> <p>2. Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting .The garboard fitting is 1\/2 NPT</p> <p>3. Connecting the light wire to an 8-28V on\/off switch. Plug in the waterproof connector</p> <p>4. Attach the red lead the positive(+) with the included in line 3 AMP assembly fuse and the black leadto the negative (-)</p> <p>5. Switch on the light to check if it works well.</p> <p>Light Color:Green Light</p> <p>Colour:As Shown</p> <p>Material:metal</p> <p>Package Contents:</p> <p>1 * boat underwater light</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>