L860‑GL 4G Module 4G Card FDD‑LTE TDD‑LTE Cat16 SPS＃L27188‑001 Item Type: L860‑GL 4G Module Material: PCB Chipset: XMM7560 LTE FDD: 1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 21, 25, 26, 28, 29, 30, 32, 66 LTE TDD: B38/39/40/41/42 UMTS: Bands 1, 2, 4, 5, 8 Form Connect: M.2 Size: Approx. 30 x 42 x 2.3mm / 1.18 x 1.65 x 0.09in 4-band 5CA, 256QAM support MIMO: 2 2, 4 2, 4 4 4x4 MIMO: Bands 1,2,3,4,7,30,40,41NB, 66 LAA (Area 46) Integration: GNSS ESim interface: Support Working Voltage: 3.135V ~ 4.4V, typical 3.3V Operating Temperature: -10 ~ + 55°C Storage Temperature: -40 ~ + 85°C AT Set: 3GPP TS 27.007 and 27.005, proprietary AT commands TX power: FDD&TDD LTE: 23 DBM WCDMA: 23.5 dBm Receiving sensitivity: FDD&TDD LTE: -98dBm ~ 102dBm Data: FDD&TDD LTE: 1Gbps (CAT 16), 150Mbps UL (CAT 13,2CA within band) UMTS/HSPA + : 42Mbps (CAT 24), 11.5Mbps UL (Cat 7) Interface: USIM: 3 V / 1.8 V PCIe BodySar Drivers: for Win 10 and for Linux Approval for Sprint/ Telefonica/ Swisscom/ Docomo/ KDDI/ Softbank/ Telstra/Optus Installation Instructions: 1. Open the back cover of the laptop with a small screwdriver and find the wireless network card (the wireless network card is square, and there are black and white two wires connected.There are two small screws fixed) 2. Unscrew the two holding screws with a screwdriver, set aside, and store well 3. Take off the old wireless network card and replace it with a new wireless network card, return to install it according to the original disassembly route, and fix it 4. Then startand automatically install the driver (the driver can be found according to the customer's computer model to the corresponding supplier)