1. Mainly used for bonding various orthodontic accessories.<br><br> 2. Easy to use, less waste, independent operation and other advantages.<br><br> 3. It has high clinical bonding strength, high efficiency and convenience of use.<br><br> 4. Gorgeous adhesive resin for next generation enamel, complete accessory.<br><br> Specification: Item Type: Orthodontic Dental Glue<br><br> Type: small set<br><br> Material: plastic<br><br> Lifespan: 18 months<br><br> Storage conditions: Store below 25 (do not freeze)<br><br> Suitable for: all types of orthodontic attachment adhesion<br><br> Main indicator of technical parameters: Curing time not more than 3000, adhesive strength on shear MPa&gt;17,2<br><br> Use: 1. Tooth preparation: cleaning the tooth enamel surface, removing dirt from the tooth surface, thoroughly rinsing the teeth with water, isolating the teeth and drying the tooth surface with an oil- and moisture-free air rifle. 2. Acid-damaged tooth surface: apply acid erosion agent to the tooth surface, after 50-60 seconds rinse thoroughly with water, dry with a dryer, the tooth surface after acid erosion becomes chalky. If there is no chalky appearance, the time of acid digestion is extended. 3. Primer: Using a bristle brush, apply a thin layer of liquid to the tooth etching surface, and with a second bristle brush (wet enough) lubricate the surface of the locks with a thin layer of liquid. 4. Gluing: Apply a small amount of paste using an agitator to the adhesive surface of the grooves covered with a liquid agent so that it forms a thin layer. Immediately after applying the paste, glue the lock and the surface of the tooth. Adjust the position of the bracket within 20 seconds and lightly press for 5-10 seconds to prevent the bracket from moving. Remove excess liquid and paste after 40-60 seconds. After 5 minutes of curing, you can proceed to orthodontic surgery. List of packages: 1 x paste 3,5g 1 x 2,5 ml digestion agent 1 x Liquid agent 8ml 7 x Brush Head 1 x needles 1 x Mixing Pen