Self-Adhesive Weather Seal Kit for Convertible Soft Top Roof Repair, Compatible with R52 Models (2001-2006)

30,95 €
+ 13,99 € Envio

Self-Adhesive Weather Seal Kit for Convertible Soft Top Roof Repair, Compatible with R52 Models (2001-2006)

  • Marca: Unbranded
Vendido por:

Self-Adhesive Weather Seal Kit for Convertible Soft Top Roof Repair, Compatible with R52 Models (2001-2006)

  • Marca: Unbranded

30,95 €

Economize 38,05 € (55%)

PVP

69,00 €
Em stock
+ 13,99 € Envio
Vendido por:

30,95 €

Economize 38,05 € (55%)

PVP

69,00 €
Em stock
+ 13,99 € Envio

Aceitamos as seguintes formas de pagamento

Descrição

Description for Mini One Cooper S Convertible R52 (2001-2006) rear hood soft top weather rubber seal repair self adhesive. This product is a DIY rubber repair solution for replacing the worn or cracked rear weather seal on the soft top of your Mini convertible. It replaces the rubber seal located above the chrome trim, which runs along the rear of the vehicle above the boot and quarter panels—the area most susceptible to aging and sun damage. The seal is made of self-adhesive rubber with 3M tape backing and measures approximately 2 meters in total length. Minor trimming may be required to fit the length and accommodate the third brake light. Instructions: Step 1: Clean the surface thoroughly to ensure maximum adhesion. Step 2: Position the new rubber strip over the area where the old rubber was removed, overlapping slightly onto the roof material. Use additional adhesive to enhance bonding. Ensure correct placement, as the adhesive sets quickly. The new rubber provides a slightly raised profile over the chrome, improving both appearance and weather sealing while protecting the ing from UV exposure. This repair has been tested through multiple seasons in various weather conditions. Avoid high-pressure washing of the roof area. Clean gently with a sponge and water. For added security, apply a small amount of super glue (not included) in concealed areas to prevent lifting, or use a bead of silicone if needed. The strip can be removed temporarily to facilitate cutting and installation, minimizing risk to the roof fabric. Tamper-proof Torx screws located under the chrome trim can be accessed by releasing the side latches (boot loading mode), allowing the lower roof section to tilt up. Support the roof with a suitable prop during installation. Package Includes: 1x replacement self-adhesive rubber seal
  • Identificação da Fruugo: 408459700-865416229
  • EAN: 1345150687435

Informações de segurança do produto

Consulte as informações de segurança do produto específicas para este produto descritas abaixo

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Avisos de segurança: Please use according to the instructions or product details!

Entrega e Devoluções

Enviado dentro de 24 horas

  • STANDARD: 13,99 € - Entrega entre terça 09 dezembro 2025–quarta 17 dezembro 2025

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Jiang Yan
  • Guangzhou Ruicai E-commerce Co., Ltd.
  • Room D2709, 203, 2nd Floor, No. 4, Yuejia 2nd Street,Shimen Street, Baiyun District,Guangzhou City,Guangdong Province
  • Guangzhou
  • CN
  • 510420
  • lu61027yeyamei632@163.com
  • 13192975727

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149