1. Item Type: Incubator Temperature and Humidity Sensor Set 2. Material: Plastic 3. Size: Approx. 160 x 80 x 95 mm / 6.3 x 3.1 x 3.7 inches 4. Sensor: A temperature sensor (2 meters long), A humidity sensor (2 meters long), approx. 2 m / 6.6 ft 5. Setting range: Humidity 10 - 80% RH, Temperature 1 - 65 ℃ 6. Display range: Humidity 0 - 99% RH, Temperature -9.9 - 99.9 ℃ 7. Measurement accuracy: Humidity 3% at 25 ℃, Temperature 1% at 25 ℃ 8. Control output: Seven - way (main heating, auxiliary heating, lighting, humidity control, right egg, left egg, fan) control, right egg, left egg 9. Output load: main heating ≤ 1500 W, auxiliary heating ≤ 1500 W, lighting ≤ 100 W, humidity control, right egg, left egg, fan ≤ 1 A/250 VAC 10. Incubation days: The maximum number of days that can be recorded is 99 days 11. Egg turning controller: Adjustable egg turning cycle 1 - 999 minutes 12. Egg turning time: 0 - 999 seconds adjustable 13. Egg turning number: 0 - 999 times adjustable 14. Ventilation control: Adjustable ventilation cycle 1 - 999 minutes 15. Ventilation time: 0 - 999 seconds Adjustable 16. Lighting control: Adjustable lighting cycle 1 - 999 minutes 17. Lighting time: 0 - 999 minutes adjustable 18. Working environment: -10 - 45℃, less than 90% relative humidity without condensation 19. Weight: Approx. 529g/19oz 20. Package list: - 1x humidity sensor - 1x temperature sensor - 1 x controller host - 1 x user manual 21. Package contents: This incubator controller kit includes 1 humidity sensor, 1 temperature sensor and 1 controller host. 22. Temperature and humidity control: The incubator controller temperature and humidity sensor kit has temperature control, humidity control, and factory reset functions. 23. Multi - function: The incubator controller temperature and humidity sensor kit has LED light indication, ejection timer control, alarm control, temperature and humidity calibration, incubation days setting, and function control parameters. 24. Easy to operate: The incubator controller temperature and humidity sensor kit also has lighting function, egg turning control, and switch operation, which is easy to operate and convenient to use. 25. Wide voltage: The incubator controller temperature and humidity sensor kit uses a wide voltage of 100 - 240V and can be connected to any incubation equipment.