You Receive: 1 x 720A pressure vacuum breaker repair kit and 1 x bonnet repair kit, including: plastic washer, O-ring, spring, poppet spider assembly, bonnet washers, bonnet O-rings, load nut rails, load washers, top plates, poppet valves, springs, spider screws, lower discs, guide spiders hex nuts, 3 canopy screws, 1 canopy, 1 bonnet, 1 bonnet gasket, and 1 bonnet O-ring. Fits 1/2 Inch to 1 Inch 720A: this bonnet repair kit is compatible with 1/2-inch, 3/4-inch and 1-inch 720A bonnet repair kits, and compatible with for Wilkins RK1-720AB 1/2Inch - 2Inch 720A engine hood repair kit. Quality Material: Made of stainless steel, rubber and plastic, which is , applicable temperature range: 33 to 110. Easy to Install: 1: close inlet and outlet shut-off valves before disassembling device; 2: remove canopy screws and canopy; 3: bleed off pressure by opening the No; 2 test knob; 4: unscrew the bonnet from the body; 5: remove the plastic washer, o-ring, spring, poppet and spider assembly; 6: after completing inspection, replace necessary parts and reassemble. Function: the 720A series pressure vacuum circuit breaker assembly is designed to be installed on the drinking water line to prevent the water stop from backsiphonage into the drinking water supply system; Unless the ball valve or valve body itself is broken, this pressure vacuum circuit breaker repair kit repair most of the frozen 720A PVB. Features: The repair kit includes all the necessary components for straightforward fixes and can restore most frozen 720-A PVBs, as long as the ball valve or the valve body isn't damaged or cracked. Notes:Our product is compatible with for Wilkins 1/2inch, 3/4inch, and 1inch Pressure Vacuum Breaker. Please confirm the fitting model before placing the order. Colour:As Shown Material:rubber+metal Package Contents: 1 x 720A pressure vacuum breaker repair kit 1 x Bonnet repair kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.