FeaturesThe main unit of the Car immobilizer system is even smaller, the remote control is lighter,The new micro-electric technology brings you more safety.The remote control of the Car security system alarm has an automatic sensing function,SpecificationUnit working voltage: 12V3VUnit quiescent current: 12mAUnit control current: 30ARemote control operating current: 3~8mARemote control standby current: 1uARemote control battery specification: CR2032How to use the remote control:Please keep the remote control alone, do not mix it with the car keys to increase the difficulty of grabbing.Coding learning: Pre the host computer learning code switch to let go, and immediately pre the remote control button, the relay in the host will beep 3 times to indicate that the code learning is succeful, and the method for learning the second remote control is the same as above. Up to 2 remotes can be learned. The code has been learned well when leaving the factory, and there is no need to repeat the operation.How to install:First, open the fuse box, find the oil pump fuse and , then replace it with the red wire plug, Keep the original fuse in a safe place, fix the main unit with a tie and cover the fuse box.NOTICE:When not using the system, turn the remote off for extended battery life, This product is not a waterproof design.Product List1 x Unit with wire (fuse=15A)2 x Sensor Remomte1 x User manual in English See more product details1.Anti-theft Unique DesignThe remote control of the Car immobilizer system is lighter and the main unit is even smaller. It adopts a new type of micro-electric technology, which brings you more safety.2.Auto-Sensing FunctionThe remote control of the Car security system alarm has an automatic sensing function, which can be used without any operation, preventing thieves from stealing the car and providing a safety guarantee for your car.3.Helpful Two ModesThere are two remote control options for Wirele immobilizers for cars. Preing the remote control repeatedly or right away after powering on is manual mode. Just bring the remote control if it is set to automatic.4.Smart Led DisplayCar immobilizer alarm It flashes once forsecond when the remote control sends a signal, and twice every second for 11 to 20 seconds if no signal is sent. If there is no signal after 30 seconds, the LED goes out.5.Effortle InstallInstallation of a car immobilizer anti-theft device is incredibly easy and fully do-it-yourself. Simply unhook the oil fuse in the vehicle's engine compartment, then replace it with our main unit by plugging it straight into the vehicle.