Hybrid Stepper Motor Driver, TB6600 0.2-5A 2-Phase CNC Controller, DC12-48V Input

28,95 €
Envio GRATUITO

Hybrid Stepper Motor Driver, TB6600 0.2-5A 2-Phase CNC Controller, DC12-48V Input

  • Marca: Unbranded

Hybrid Stepper Motor Driver, TB6600 0.2-5A 2-Phase CNC Controller, DC12-48V Input

  • Marca: Unbranded
PVP: 37,95 €
Preço: 28,95 €
Poupa: 9,00 € (23%)
Vendido por:
28,95 €
Envio GRATUITO

Em stock

Aceitamos as seguintes formas de pagamento

Descrição

Feature: 1. The two-phase hybrid stepping motor has a dynamic voltage of 12 to 48 V, a current of less than 5 A, and an outer diameter of 35 to 86 mm. 2. The driver adopts the current loop subdivision control of the driver, the motor torsion ripple is small, the low speed operation is very stable, and there is almost no vibration and noise. 3. High-speed torsion is much higher than other two-phase drives, high positioning accuracy 4. Widely used in engraving machines, CNC machine tools, packaging machinery, etc. 5. Average current control, two-phase sinusoidal current drive output and opto-isolated signal input/output 6. The product has overvoltage, undervoltage, overcurrent and short circuit protection 7. The offline enable signal is valid, the drive fault is reset to disable any pulses, and the motor maintains torsion after the drive output power component is turned off. 8. The PC control signal can be either high or active low. Control signal when active high 9. The negative terminals together act as an active low signal, and the positive ends of all control signals are used together as a common signal. 10. The half-flow function is a 200ms step pulse, and the driver output current is automatically reduced to 50% of the rated output current to prevent motor heating. 11. There must be 20mm space around, and it should not be placed adjacent to other heating equipment to avoid dust, oil mist, corrosive gas, excessive humidity and strong vibration. Specification: Item Type: Input Voltage: DC 12-48V Input Input: 1-5A Current, Select Drive Stepper Motor Output Current: 0.2A-5A Temperature Operating Temperature: -10-45℃; Storage Temperature -40℃ -70℃ Humidity: No Condensation, No Drop Gas prohibits combustible gas and conductive dust Set the Number of Steps Per Motor Step for the Motor 200(synchronizing), 400 (2 segments), 1600 (8 segments), and 3200 Steps (16 segments). Power Interface: 1. DC +, DC-: Connect the drive power DC +: DC Power Supply Level, Power Supply Voltage Dc 12 To 48v, Maximum Current 5a DC-: DC Power Supply Negative Level. 2. A + A-B + B-: Connecting Two-Phase Hybrid Stepping Motor The connection between the driver and the two-phase hybrid stepping motor and the four-wire system, the parallel and series connection of the motor windings, and the connection method, the high-speed performance is high, but the driving current is large (the motor winding current is 1.73 times), when the driving current is equal series connection when the motor winding current Troubleshooting: State Light Indication RUN: The Green Light Works Normally. ERR: Red Light, Power, Indicator Light, Power Indicator Control Signal Definition: PUL +: stepping pulse signal input side or positive pulse signal input positive terminal PUL-: Negative input of negative input pulse signal or positive pulse signal DIR +: input the positive direction step direction signal or input positive terminal negative pulse signal DIR-: Negative terminal for step direction signal input or reverse pulse signal input in negative direction EN +: Offline can reset the signal input EN-: Offline resettable signal input negative. Package List: 1 x TB6600 Stepper Motor Driver
  • Identificação da Fruugo: 412086988-871530991
  • EAN: 7603816685930

Informações de segurança do produto

Consulte as informações de segurança do produto específicas para este produto descritas abaixo

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Etiquetas de segurança do produto

CE Mark
Avisos de segurança: Warning: Please read the product instructions carefully before use to ensure correct use.
Número de série: 7603816685930

Entrega e Devoluções

Enviado dentro de 2 dias

  • STANDARD: GRÁTIS - Entrega entre segunda 06 outubro 2025–segunda 13 outubro 2025 - GRÁTIS

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • No. 1-1, Door 57
  • Shihua Village
  • Qingshan District
  • Wuhan
  • CN
  • 430000
  • goldxinks@163.com
  • 0086 17786498762
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795