<p>The PoE Extender features one 30W PoE input port and two 15W PoE output port, running one cable to connect to 2 POE IP devices.</p> <p>The POE extender can extend the range of the Ethernet network by an additional 100m (328 ft). Extended PoE installation range by additional 100M. The maximum is 6 pieces, 700 meters (2296ft) when deployed in cascade.</p> <p>Supports 10,100Mbps data rates, comply with IEEE802.3at and IEEE802.3af Standard. Provides 802.3af power levels when powered by any 802.3at source.</p> <p>The PoE Extender cost effective installation - does not require local power and other configuration required. Powered via the PoE input, Plug and Play. Automatically detects and protects PoE equipments from being damaged by incorrect installation.</p> <p>It can forward both Ethernet and PoE power for 1 terminal equipment via Cat5,Cat5e,Cat6,Cat6e,UTP cable(less than 120m).</p> <p>PoE input: 1 RJ45 port(DC 48-57V)</p> <p>PoE output: 2 RJ45 port</p> <p>Input power: 30 Watts Max</p> <p>Output power: 15.4 Watts Max</p> <p>Network Medium: Cat5 ,Cat5e,Cat6,Cat6e,UTP cable(less than 120m)</p> <p>Daisy Chain Distance: up to 700m(6 pieces)</p> <p>Repeater Mode: Store and forward</p> <p> Address Table: 2K</p> <p>Packet Buffer Memory: 48 Byte</p> <p>Switching Capacity: 400Mbps</p> <p>PoE Standard: IEEE 802.3af\/at</p> <p>PoE Cable Core: 1\/2(+), 3\/6(-)</p> <p>Power Supply Type: Mode A,End-Span</p> <p>LED Display: PoE Working status, Ethernet</p> <p>Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet.</p> <p>Storage Humidity: 5%~90%, No Condensation</p> <p>Colour:black</p> <p>Material:plastic</p> <p>Size:88 x 44 x 22mm</p> <p>Package Contents:</p> <p>1 x 2 Port POE Extender</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>