ESP32-S3-Touch-LCD-2.8C is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.8inch capacitive touch screen can smoothly run GUI programs such as for LVGL. Combined with peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.81 b/g) and Bluetooth 5 (LE), with onboard antenna. Built-in 512KB and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.8inch capacitive touch display, 480x480 resolution. Supports touch control via I2C interface, with interrupt support. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, sensor, TF card slot and battery recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios. Note:There may be differences in printing/appearance due to different batches, which not affect the use. Colour:Black Material:PCB+electronic components Package Contents: 1 * Development Board 1 * Cable kit(Cable color is random and cannot be specified.) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.