DY2015A Auto Battery System Tester Analyzer Capacity Resistance Voltage Detector with LCD Display E2U911

69,00 €
Envio GRATUITO

DY2015A Auto Battery System Tester Analyzer Capacity Resistance Voltage Detector with LCD Display E2U911

  • Marca: Unbranded
Vendido por:

DY2015A Auto Battery System Tester Analyzer Capacity Resistance Voltage Detector with LCD Display E2U911

  • Marca: Unbranded
PVP: 94,00 €
Preço: 69,00 €
Poupa: 25,00 € (26%)
Vendido por:
69,00 €
Envio GRATUITO

Apenas 9 em stock

Aceitamos as seguintes formas de pagamento

Descrição

features 1Complies with CAT III 600V. Equipped with a large LCD display, easy to read the value. 2Comprehensively diagnose battery status and car charging system, measure and display parameters for battery status diagnosis. 3Battery test, cold start amplifier, battery resistance, voltage, life analysis. Engine system test, battery system changes with the start process. Charging system test: charging system working status output. Maximum load system test, battery maximum load status. 4Overload protection and faulty connection protection ensure that the operator is always safe. 5Easily read the conclusion that the battery condition is good/normal/note/replace. Battery detection, unit conversion CCA / IEC / EN / DIN.Item Type: AutoBatterySystemTesterMaterial: ABSCCA: 100-1700IEC: 100-1000EN: 100-1700DIN: 100-1000JIS: Reference table in manualDisplays Battery Internal Resistance: Display ohmsDisplays Battery Voltage: Display voltsDisplays Battery Condition: Good/OK/pay attention/replaceTest 12V Batteries: YESBattery Recharge Indicator: YESReverse Polarity Protection: YESDetects And Displays Bad Cell: YESInternal Unit Conversion EN,EIC,DIN: YESOverload Protection Of Input Voltage: YESCable Length: APPROX. 700mm/27.6inSize: Approx. 180x90x32mm/7.1x3.5x1.3inWeight: Approx. 400g/0.9lbsHow to Use:1.Connect the positive and negative poles of the instrument to the positive and negative poles of the car battery.2.Start the car and start the test.3. Observe the parameters of the tester and print out the measured data.Description:This battery testers are used for activated style acid storage battery.Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data, which availably by 4-wire Kelvin test connection. Besides it strengthens input protection inside , in order to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing.This tester is the best tool for battery sales, vehicle repair and condition check of all kinds of acid batteries that used in equipment system associated with acid battery. .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }Package List1 x BatterySystemTester1 x Manual
  • Identificação da Fruugo: 305603290-684655383
  • EAN: 7987249550653

Informações de segurança do produto

Consulte as informações de segurança do produto específicas para este produto descritas abaixo

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Etiquetas de segurança do produto

CE Mark

Entrega e Devoluções

Enviado dentro de 3 dias

  • STANDARD: GRÁTIS - Entrega entre segunda 27 outubro 2025–quinta 13 novembro 2025 - GRÁTIS

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Advance Parts Zone
  • Shenzhen Mike Technology Co. Ltd.
  • No. 108 Donghuan 1st Road
  • Yousong Technology Building 4-B01
  • Shenzhen
  • CN
  • 518000
  • miekortech@hotmail.com
  • +8613714168241

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • Ben XU
  • REP Europe GmbH
  • Annastr. 9 B
  • Griesheim
  • Germany
  • 64347
  • info@rep-europe.de
  • +4915751253212
  • http://www.rep-europe.de/