A. Made of good materials, it is durable and practical. B. These should be pasted on any clean surface. C. The stickers can fit the car parts you need to decorate. D. It can make your car look nice and provide some protection. E. It is suitable for Accord models from 2008 - 2012 and left - hand drive cars. F. When purchasing, please check the installation instructions: It is suggested to operate on a sunny day with relatively high temperature or when the car is not in use at night. G. - First, clean the edge of the wheel hub and the area to be pasted to make sure the surface is free of dust, water and oil. Try to keep the wheel hub surface dust - free and your hands clean to prevent dust from sticking to the pasting surface. - Heat the whole roll of stickers with a hair dryer until they become soft for a better effect. The principle of heating and pasting is to use the expansion and contraction of heat. After heating, the rubber surface expands and pastes, and adhesive force will be generated when it cools and contracts. H. Note: Avoid using a high - pressure water gun to wash within 24 hours, and it is advisable not to drive at too high a speed (the speed should preferably not exceed 80 - 100 yards per hour). Everything will likely be normal after 48 hours. I. Color: Carbon fiber pattern J. Material: PVC K. Package contents: - 15 center console stickers - 4 rear exhaust port stickers - 2 steering wheel stickers - 8 door control panel stickers L. Warm reminder: - Check if the shape of the relevant parts of your car is consistent with the shape of the stickers. - Only the above - mentioned package contents are included, and other items are not. M. Note: Light and different monitors may cause the color of the item to be slightly different from the actual one. A measurement error of ±1 - 3 cm is allowed.