(If you encounter any problems, please be sure to contact our customer service first. Please do not leave a bad review first. Due to the time difference, etc., the customer service will reply as soon as possible after seeing the message. We very much hope to answer your questions, thank you.) Fitment: compatible for Kawa-saki ER-6F 2012-2017 compatible for Kawa-saki ER-6N 2012-2017 compatible for Kawa-saki KLE650 2010-2017 compatible for Kawa-saki 250R(Fi model) 2013-2015 compatible for Kawa-saki 300 2013-2018 compatible for Kawa-saki 400R 2013-2016 compatible for Kawa-saki 400 2018 compatible for Kawa-saki 650 2012-2016 compatible for Kawa-saki 1000 2011-2016 compatible for Kawa-saki 650 2010-2018 compatible for Kawa-saki 1000 2012-2018 compatible for Kawa-saki VN900 2011-2015 compatible for Kawa-saki S 650 2015-2018 compatible for Kawa-saki 900 2011-2018 compatible for Kawa-saki W800 2011-2017 compatible for Kawa-saki Z300 2015-2016 compatible for Kawa-saki Z650 2017-2018 compatible for Kawa-saki Z750 2010-2012 compatible for Kawa-saki Z750R 2011-2012 compatible for Kawa-saki Z800 2013-2017 compatible for Kawa-saki Z800e 2013-2017 compatible for Kawa-saki Z1000 2010-2016 compatible for Kawa-saki Z1000SX 2011-2016 compatible for Kawa-saki ZX-6R 636 2006 compatible for Kawa-saki ZX10R2009 compatible for Kawa-saki ZRX1200 2011-2015 compatible for Kawa-saki Brute compatible for ce 750() All Years compatible for Kawa-saki Mule () All Years compatible for Kawa-saki Teryx () All Years Description: Condition:100% Brand New Color of Light Source: Red/Blue/green/white/orange Item Name:Speed Gear Display Indicator Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch Feature: Shows current gear number Indicates current gear from 1 to max of 6. as well as a neutral indicator. Detects the current gear faster than other gear indicators that use speedometer/tachometer signal. Display can be mounted anywhere compatible for eword: Congratulations on your purchase of a gear position indicator,This product will fit all compatible for Kawa-saki fuel injected(EFI)motorcycles which have on board Diagnostic System connector. This connector is referred as compatible for KDS(compatible for Kawa-saki Diagnostic System) in the compatible for Kawa-saki manuals.Unlike other gear indicators available compatible for your bike,this product connects to the diagnostic connector.It make the installation very sample. The unit reads data directly from the ECU, offering faster and more reliable readings than competing products.The display is auto learning,there are no button and no ;programming wire; Know limitations;Your bike is not equipped with Gear Position Sensor. therecompatible for e determining the gear in use is only possible when the engine is running and the clutch is released. Installation: 1. Find the 4-pole diagnostic connector (also called as compatible for KDS) under the seat, near the ECU module (Black, Grey, or semi-transparent plug). 2. Normally it has a removable semi-transparent cap or ?dummy? plug (without wires) attached to it. The connector may be partially covered by black tape. Note: You may find TWO of this connector on your bike. In this case, try both connectors, but only one of them will supply data to this gear indicator. It will not harm your bike if you connect the gear indicator to the wrong plug first. 3. Detach the cover (cap) from the plug and connect the gear indicator plug. 4. Route the cable to the mounting location along the frame. Peel the green plastic off from the back of the unit, and mount the display. 5. Secure the cable with the cable ties supplied, ensuring that the steering movement is not impaired by the cable. Troubleshooting: You may find TWO semi-transparent connectors on the bike with a removable cap or dummy plug.Try the second one if the unit does not work from the first one.Disconnect the Gear Indicator connector and check whether the pins are broken,bent or pushed out of position.Reconnect the plug,and make sure that all connections are good and the connector is fully seated.If you can not execute the setup procedure,your battery might be old or weak.Charge the battery or connect another battery using a jumper cable.If some gears are not indicated properly when the engine is running and clutch is released,rest the unit and setup again.If the problem persists.your clutch might be slipping. (No reset is generally required. If you need to reset, please consult our customer service. The customer service will reply you as soon as possible after seeing the incompatible for mation.)