compatible with Kawasaki ZX9R 1998 1999 2000 2001 2002 2003 ZX 9R Ninja ZX-9R Motorcycle Gear Indicator Digital 1-6 Level Gear Meter

118,31 €
+ 9,84 € Envio

compatible with Kawasaki ZX9R 1998 1999 2000 2001 2002 2003 ZX 9R Ninja ZX-9R Motorcycle Gear Indicator Digital 1-6 Level Gear Meter

  • Marca: Unbranded

compatible with Kawasaki ZX9R 1998 1999 2000 2001 2002 2003 ZX 9R Ninja ZX-9R Motorcycle Gear Indicator Digital 1-6 Level Gear Meter

  • Marca: Unbranded
Preço: 118,31 €
Vendido por:
118,31 €
+ 9,84 € Envio

Em stock

Aceitamos as seguintes formas de pagamento

Descrição

Features: Condition:100% Brand New Color:Black Light Color: Red/Blue/Green 1-6 Gear display Fitment: For Kawasaki Ninja ZX9R 1998-2003 Instructions Guide: Disclaimer: Do not attempt to install the product if you dont have basic mechanical skills. If in doubt, please consult with your dealer. 1. Remove the seat and raise the fuel tank. 2. Locate the Speed Sensor coupler. The Speed Sensor is mounted on the front sprocket cover, and the 3-pole black speed sensor coupler is situated 20-40 cm (8-16) away from sensor. The connector is accessible under the fuel tank (W650: behind left side cover). Confirmation: Separate the Speed Sensor coupler (you might need to use a small flathead screwdriver to get the coupler apart). Rotate the wheels while ignition is on. The speedometer should indicate 0. If so, turn the ignition off and proceed to the next step. Otherwise, if the speedometer registers a speed other than 0, you have not disconnected the correct coupler and need to look again. 3. After separating the Speed Sensor coupler, plug in both the male and female 3-pole GFYSHIP harness connectors. Make sure the connectors are fully seated. 4. Find an RPM signal wire: ZX-6R, ZZR600: Tachometer wire at the Dashboard connector or at the ECU connector Light Blue (Solid Light Blue wire) ZX-9R: Pickup coil (crankshaft sensor) connector under the fuel tank 3-pole, White triangular connector Yellow (Solid Yellow wire) W650: Pickup coil (crankshaft sensor) behind left side cover 4-pole connector Black/White (Solid Black wire with thin White stripe) 5. Peel off the black sleeve (tape), leaving about 3 cm (1.2) of this wire exposed. 6. Connect the GFYSHIP Black/Green wire to this wire, using the Red wire tap connector supplied. Setup: You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear. - Raise the rear wheel off the ground by using a stand, and start the engine in Neutral. (If you do not have a stand, you may setup the unit while riding. Find a long, straight road with light traffic.) - The display will blink 1. Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear. - When the display shows 2, select second gear. Repeat this process until all gears are thought (5 or 6). The unit is programmed and should indicate the gears correctly. Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional. Package Include: 1 x Gear Indicator
  • Identificação da Fruugo: 348580706-760946598
  • EAN: 3670062060617

Informações de segurança do produto

Consulte as informações de segurança do produto específicas para este produto descritas abaixo

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Etiquetas de segurança do produto

CE Mark
Avisos de segurança: Check the product before use,do not let your children touch this product alone to avoid swallowing or other injuries. to ensure safe use.
Ingredientes: 95% plastic and 5% metal

Entrega e Devoluções

Enviado dentro de 2 dias

  • STANDARD: 9,84 € - Entrega entre segunda 06 outubro 2025–quarta 22 outubro 2025

Enviamos a partir de China.

Fazemos o nosso melhor para garantir que os produtos que encomendar lhe serão entregues na totalidade e conforme as suas especificações. No entanto, se receber uma encomenda incompleta ou itens diferentes dos que encomendou, ou existir qualquer outra razão pela qual não estiver satisfeito com a sua encomenda, poderá devolver a encomenda ou quaisquer produtos incluídos na mesma, e receber um reembolso total dos itens. Ver a política de devoluções na íntegra

Detalhes de conformidade do produto

Consulte as informações de conformidade específicas para este produto descritas abaixo.

As informações a seguir são fornecidas pelo revendedor independente que vende este produto.

Fabricante:
As informações seguintes apresentam os dados de contacto do fabricante do produto em causa vendido na Fruugo.

  • Shenzhenshibaishangkejiyouxiangongsi
  • Shenzhenshibaishangkejiyouxiangongsi
  • Longgangqu Bantianjiedao Banxuegangdadao Mengliyuan 4Dong 410
  • Shenzhen
  • CN
  • 518000
  • Carilo@163.com
  • (+86 075584802881)
  • https://WWW.sino-sear.com

Pessoa responsável na UE:
As informações seguintes apresentam os dados de contacto da pessoa responsável na UE. A pessoa responsável é o operador económico designado, sedeado na UE, incumbido das obrigações de conformidade relativas ao produto em causa vendido na União Europeia.

  • Hans-Joachim Bobsin
  • SINO-SEAR GmbH,
  • Feuerbachstrasse 11,14471 Potsdam,
  • Germany
  • DE
  • 14471
  • info@sino-sear.com
  • 49 33195130908
  • https://WWW.sino-sear.com