This is a single outlet washer pump designed for windshield cleaning. The washer pump is located at the bottom of the washer bottle, typically positioned low on the vehicle. Access to the washer pump may require partial removal of the inner wheel arch or bumper trim. The pump is push-fitted into the washer bottle. Washer pipes are push-fitted onto the pump. Some models may have a clip to release the pipes. If the pipes are difficult to remove, applying heat with a hair dryer can help loosen them for easy removal. Avoid operating the washer pump dry, as this may lead to failure. Use windshield washer fluid according to recommended dilution levels to reduce the risk of freezing. Do not add antifreeze to the washer bottle. Always add windshield washer fluid first, then top up with water. Item Specifications: Condition: New Manufacturer Part Number: 76846-TA0-A01, 76846-TA0-A01 Interchange Part Number: 76846TA0A01 Type: Windshield Washer Pump Fitment Type: Direct Replacement Voltage: 12V Connector: 2 Pins Fit for: Accord 2008-2011 (For Japan Only) 2012 (For Japan Only) TSX 2009-2013 (For Japan Only) Color: White Material: Plastic Package Contents: 1 x Pump 1 x Rubber Grommet Only the above package content is included; other products are not included. Note: Light reflection and different display settings may cause slight variations in the color of the item in the image compared to the actual product. Measurement may vary by +/- 1-3 cm.