It is a 2CH ArtNet-DMX512 network converter With 2 standard DMX512 data output ports, it supports 2x170 LED pixels ArtNet can be managed in broadcast or unicast mode 1 channel of ArtNet data can be input, and 2 channels of DMX.512 data can be output (a total of 1024 channels can be output) All network configuration parameters can be directly modified via its buttons and display. So you don't need to connect it to a computer to set up You can use other software, consoles, and Art-Net enabled controllers to distribute Art-Net data over the network. It is often used to expand the DMX output ports of Tiger Touch consoles, MA2 consoles and the software for Madrix Installation: With a M10 screw hole. It can be fixed by a light hook or installed in any safe position. Easy to install thanks to holes on both sides of the converter Supports two power supply modes: Powered by mains electricity and POE (48V) Widely used: Can be applied to stages, bars, wedding ceremonies, etc. Voltage: AC220V Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on Color: Black Material: Iron Package Contents: 1 x Artnet Dmx512 Network Converter 1 x power cable 1 x network cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.