Feature:1. USB POWERED: This IR thermal imaging camera module can be directly powered by USB 5V to generate infrared images, easy to operate.2. EXCELLENT CHIP: Using AMG8833 infrared thermal sensor, the resolution is 8x8, and the maximum human body sensing distance is 7 meters.3. GOOD PERFORMANCE: The thermal imager has high performance and high output resolution, sensitive and reliable, with strong practicability.4. COMPACT SIZE: The infrared temperature sensor is equipped with shells, with small and compact structure, which is easy to install and use.5. FOR ELECTRONICS: Infrared thermal imager has a measurement temperature of 080C and is widely used in testing electronic products.Specification:Item Type: Infrared Thermal ImagerMaterial: PCBTemperature Accuracy: High Performance Type High Gain: Typical 2.5 4.5High Performance Type Low Gain: Typical 3.0 5.4Human Detection Distance: Approx. 7 meter / 23ft or less (reference value)Measuring Temperature: 0-80Viewing Angle: Typical 60Optical Axes Gap: Within typical 5.6Current Consumption: Typical 4.5mA (normal mode)Typical 0.2mA (sleep mode)Typical 0.8mA (stand by mode)Setup Time: Typical 50ms (time to enable communication after setup)Typical 15s (time to stabilize output after setup)Number of Pixel: 64 (vertical 8 x horizontal 8)External Interface: 12;C (fast mode)Frame Rate: Typical 10 frames/sec or 1 frame/secOperating Modes: Normal, Sleep, Standby (10s or 60s flash)Output Mode: Temperature OutputCalculation Method: No moving average or twice moving averageTemperature Output Resolution: 0.25/32.45Number of Sensor Addresses: 2 (1 address c slave address)Size: Approx. 38 x 36 x 17mm / 1.5 x 1.4 x 0.7inWeight: Approx. 19g / 0.7oz.Package List:1 x Infrared Thermal Imager with ShellNote:Powered directly by USB 5V, it can be used when plugged in.