AC85-250V/DC24-100V 10A Relay Wireless Remote Control Switch RF 433Mhz Transmitter On/OFF Smart Switch Board for LED Lamp Motor AC85-250V/DC24-100V 10A Relay Wireless Remote Control Switch RF 433Mhz Transmitter On/OFF Smart Switch Board for LED Lamp Motor Specifications: Receiver: Working voltage: AC85-250V/DC24-100V Static condition: less than 8mA Operating temperature: -40 +80 Receiving sensitivity: Greater than -105 DBM Operating frequency: 433MHz Output voltage: Input = Output Maximum load current: 10A Dimensions: 60.5x50x25.5mm Transmitter: Working voltage: DC6V (2PCS CR) Operating frequency: 433MHz Remote distance: 20-50 meters Working current: 13mA Code: EV1527 Dimensions: 57x32x11cm Working mode: The jumper wires on the pins have changed the way they work Switch: The jumper is not connected to any two pins. Tap: Hold down -> On; Release -> Off. Self-locking: The jumper connects pins 1 and 2. Method: Press -> Open; Press the same button again -> Close Interlocking: The jumper connects pins 2 and 3. Relay: Press -> to open; Press other buttons -> Close. Learning and clearing methods: Learning: Press the learning button for 4 to 6 seconds. The indicator light will go off. Release your finger and press any button on the remote control. The indicator light will flash 5 times, indicating that the learning is successful. Clear: Press and hold the learning button for about 8 seconds. When the indicator light changes from OFF to ON, then press the remote control. If the relay does not respond, it indicates that the code has been cleared successfully. Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 1mm-1cm differences due to manual measurement. Package Included: 1xRelay Switch 1xRemote Control _x000D_ _x000D_