8 Slots 1356MHZ/125KHZ Chameleonu Contactless Smartcard Emulator Compliant To NFC Tool For RFID System _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ 8 Slots 13.56MHZ/125KHZ Chameleonu Contactless Smartcard Emulator Compliant To NFC Tool For RFID System _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Working frequency:125KHZ /13.56MHZ _x000D_ Battery:Lithium battery _x000D_ Power on:Automatic start and stop. _x000D_ Communication mode:TypeC/USB/Bluetooth _x000D_ APP:Open source Nfc tool.Decoding mode: Read card or Detect device.Note:don't support clone card. _x000D_ _x000D_ Already implemented: _x000D_ 1. Click the A button to switch the card slot to the right. If the card slot is not enabled, it will automatically skip and switch to the next one. _x000D_ 2. Click the B button to switch the card slot to the left, and other features are the same as above. _x000D_ 3. In the sleep state, press and hold the B button, insert the data cable, and then release the B button to enter the UPDATE mode. _x000D_ Tip: When the color of the card slot is Red, the card slot is enabled with IC simulation + ID simulation at the same time.When the color of the card slot is Green, the card slot only enables IC card simulation,When the card slot color is Blue, only ID card simulation is enabled for this card slot. _x000D_ Due to different product batches, the appearance of some accessories may be different, which will not affect the use _x000D_ Colour:Black _x000D_ Material:Plastic _x000D_ _x000D_ Package Contents: _x000D_ 1x Smartcard Emulator kit _x000D_ _x000D_ Only the above package content, other products are not included. _x000D_ Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_